MT Drag Radial PRO

My buddy runs a Hoosier 30x9x15 radial on his H/Stock auto car. He pulled the axels out to change gear and the axels splines where twisted about 3/16 inch, which means, dead hooking is hard on parts. Just saying, but im still planning on running them on my F/Stock Duster and all of the Stocker guys run them.

I loved those 275 radial Hoosiers i had on my Duster Matt. It only ran high 11's, but the 60 foot was ultra consistent from one outing to the next. And that with cheap shocks front and back.
Got two years out of the last pair, wifh a good bit of street driving thrown in.
They are very light and hook extremely well with a very light burnout. Ran 18 in them at the track.

Thanks for the offer Joe, but the 30's are to tall, 28" is the max tire. I will do some reading on the new Hoosiers. Thanks for the feedback

Maybe I missed it above, but are you looking for DOT-legal radials, or track-only tires?

Track only, any part # for the hoosiers, and the M/T

17317 is the Hoosier 275 part number.
The 295 has a 94.5 runout, likely a good bit taller than what you can fit.

3754X = M/T

I run the Hoosier 30 x 9 radial slicks and I really like them. As long as I stage right in the tracks where everyone is launching they hook great for me. And as was said no swaying at all on the top end. She goes nice and straight. Actually I have also been driving on the street the last 5 years on the Hoosier radial slicks and they handle great on the road also. Good luck with that nice looking Duster ! Ron