Howards Roller Lifters

Print Thread

Howards Roller Lifters #2320809 06/13/17 10:15 PM 06/13/17 10:15 PM
Joined: Apr 2003 Posts: 1,613 Burlington,Ont. 77DragracerR/T OP top fuel
77DragracerR/T OP top fuel Joined: Apr 2003 Posts: 1,613 Burlington,Ont.	This is the lifters i bought to run with my new Comp roller cam XR286-10 Lifters are 91717 http://howardscams.com/i-24078025-howard...er-lifters.html My question is, do you still have to do oiling mods? I sent a email to Howards earlier today but haven't heard anything. These lifters look like there should be no problem with oiling 77 Aspen R/T 60'@1.41 10.76 @ 123.26 http://www.youtube.com/watch?v=Eya3Ue8KoZk

Re: Howards Roller Lifters [Re: 77DragracerR/T] #2320881 06/13/17 11:52 PM 06/13/17 11:52 PM
Joined: Jan 2003 Posts: 8,021 Tulsa OK Bad340fish master
Bad340fish master Joined: Jan 2003 Posts: 8,021 Tulsa OK	Unfortunately you won't know until you put them in and pre oil the engine. I would assemble it with the rockers on and pre oil before you put the intake on so you can see what is going on. 68 Barracuda Formula S 340

Hop To