Who does the best refinishing, straightening and anodizing for the upper door belt and rear 1/4 window chrome for 70 - 71 'Cuda?
Good turn around time and quality is important.
TIA

They should be stainless steel, so not anodized at all.

Barry, the upper door belt is anodized aluminum on Cuda's.
I have a few sets of originals, and up close you can see the difference between the door and quarter belt moulding.

Interesting. I just learned something, thank you!

Another option

Your best bet is to go the repop route - otherwise you need NOS - I have not found the right person yet that can repair these mouldings - so you're wasting money unless you can get somebody to recommend someone that can do it properly.

Best of luck!!!!!!!!

Norm Huie at shine on Me in California does excellent work.Good turn around time.

Thanks for the input.
I bought a 6bbl 70 Cuda in August of '77.
It had a scratched up passenger door belt chrome.
I bought one NOS from Ma Mopar back then for the paltry sum of $ 5.17 out the door.
If we would have only known

Shine on Me Trim in California restored my belt mouldings and did a fantastic job. They are one of the few restoration/replating shops that can still do the correct bright dip anodizing.