Thanks again everyone,,, I'm going with the 2" TTIs
Any recommendations on where to get them $$ ? Summit ? Other ?
Might purchase the entire exhaust from TTI while I'm at it.
Doug

I bought my from Chicago Connection, was the cheapest place including shipping charges at the time when I bought them in 2014.

They have a set of authorized distributors who aren't supposed to sell TTI products for less than they're advertised on TTI's website.

Sometimes you'll see a free shipping promotion that saves some $, especially if you're getting a complete system. Other than that... ?

Thanks Duster and Brad !!

I bought all my TTI exh from Mancini's and it was a good price. Ron

Thanks Ron,,,We visit Detroit often,,,so I could save on shipping @ Mancini,,,providing the wife has a place to sit next to the exhaust system on the ride back,,,lol
Dwayne mentioned our motor setup will be pretty similar,,,hope mine runs as well as your car,,,,
Doug

My friend Ron Johnson bought the 2.125" TTI Stepped headers for the 500" LB that we put in his '72 Cuda' last month. We had to use those because of the Indy raised port heads. This was another major leap forward for Ron. He had a tired 383 in the car before and it had some no name headers. The best ETs he had been able to run before were 13.5s.

The engine had been built by a local guy and was offered to him at a swap meet. I saw the engine with the pan off, steel crank, aluminum rods, gear drive, roller cam and aluminum roller rockers. It runs on pump gas and we have not taken it to the track yet(it rains in Washington a lot). He bought a CE roll bar kit and we have a welder lined up to install it (one of my neighbors) We will make a pass or two and when he gets tossed out, he will park it for the roll bar and then try again. He drove it home from my shop to his home in Tacoma and then had mufflers made up. It is not a street car anymore

He has a Magnum Force front motor plate and no T-Bars, 4 link in the rear and Wilwood brakes. I have offered him my Dana 60-2 in place of his 8.75" because we know that won't last.

Thanks for the kind words Doug. Dwayne is one of the best out there IMO and one heck of a nice person. Cant go wrong with his advice and build. Good luck with it. Ron

don't forget my vote to move the exhaust tips in front of the rear tires AAR style