Re: What is a good zinc additive for oil?
[Re: MI_Custumz]
#2242639
01/28/17 02:30 AM
01/28/17 02:30 AM
|
Joined: Jan 2003
Posts: 27,421 Balt. Md
383man
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 27,421
Balt. Md
|
My cam grinder recommended to use a good oil with alot of zinc and a small bottle of zinc additive. I have always used Valvoline VR1 racing oil and I add a small bottle of "Risoline" zinc additive. All I can say is I have only ever run flat tappet cams and I have never wiped a cam lobe. Ron
Last edited by 383man; 01/28/17 02:31 AM.
|
|
|
Re: What is a good zinc additive for oil?
[Re: MI_Custumz]
#2242642
01/28/17 02:37 AM
01/28/17 02:37 AM
|
Joined: Nov 2005
Posts: 1,943 San Angelo, Texas, U.S.A.
1968RR
top fuel
|
top fuel
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
|
This thread is a good place to start: Moparts ZDDP thread For a more in-depth read: ZDDP article
"When I'm in a slump, I comfort myself by saying if I believe in dinosaurs, then somewhere, they must be believing in me. And if they believe in me, then I can believe in me." - Mookie Wilson
|
|
|
Re: What is a good zinc additive for oil?
[Re: MI_Custumz]
#2242809
01/28/17 02:47 PM
01/28/17 02:47 PM
|
Joined: Nov 2007
Posts: 21,910 Kirkland, Washington
Pacnorthcuda
Too Many Posts
|
Too Many Posts
Joined: Nov 2007
Posts: 21,910
Kirkland, Washington
|
I don't know if I have a flat tappet cam in my engine. I bought it in 2005 and it's a 64 block. No clue as to what the internals are. I don't want to add zinc and have it mess something up. Looks like it has a bit more than conventional Valvoline 10w30, but not way up there. .??? You've owned the car for 12 years and you don't know? You could simply remove a valve cover and inspect. I don't understand your last statement "Looks like it has a bit more than conventional Valvoline 10w30, but not way up there." At all.
|
|
|
Re: What is a good zinc additive for oil?
[Re: MI_Custumz]
#2242831
01/28/17 03:11 PM
01/28/17 03:11 PM
|
Joined: Nov 2005
Posts: 1,943 San Angelo, Texas, U.S.A.
1968RR
top fuel
|
top fuel
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
|
I don't know if I have a flat tappet cam in my engine. I bought it in 2005 and it's a 64 block. No clue as to what the internals are. I don't want to add zinc and have it mess something up. Looks like it has a bit more than conventional Valvoline 10w30, but not way up there. Using a high-zinc motor oil will never damage an engine. The only things that they can harm are catalytic converters, which shouldn't be an issue for a '70 Monte Carlo.
"When I'm in a slump, I comfort myself by saying if I believe in dinosaurs, then somewhere, they must be believing in me. And if they believe in me, then I can believe in me." - Mookie Wilson
|
|
|
Re: What is a good zinc additive for oil?
[Re: Pacnorthcuda]
#2243024
01/28/17 09:01 PM
01/28/17 09:01 PM
|
Joined: Dec 2003
Posts: 5,746 Port Huron, Michigan
MI_Custumz
OP
master
|
OP
master
Joined: Dec 2003
Posts: 5,746
Port Huron, Michigan
|
I don't know if I have a flat tappet cam in my engine. I bought it in 2005 and it's a 64 block. No clue as to what the internals are. I don't want to add zinc and have it mess something up. Looks like it has a bit more than conventional Valvoline 10w30, but not way up there. .??? You've owned the car for 12 years and you don't know? You could simply remove a valve cover and inspect. I don't understand your last statement "Looks like it has a bit more than conventional Valvoline 10w30, but not way up there." At all. I'm not really good at some mechanical stuff. The price difference between ZR-1 and conventional isn't that much of a difference. I did stop by NAPA and talked to a guy in there and he said high mileage has more zinc, but according to Valvoline online high mileage (max life) has zinc/phosphorus% of .083/.077, conventional is .083/.076, and ZR-1 is .14/.13. Looks like ZR-1 has the most. I don't have the mechanical know how on lots of things, but wish I had learned more when my dad was working on cars. I usually take it to someone to get stuff done if I can't figure it out. I could call the shop that works on it and see if they know from what they've done on it. I wouldn't even know what to look for if I took off a valve cover to be honest.
|
|
|
Re: What is a good zinc additive for oil?
[Re: MI_Custumz]
#2243030
01/28/17 09:14 PM
01/28/17 09:14 PM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
master
|
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Generally...the parts houses guys give out meaningless info, when it comes to zinc levels. They have no idea...
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Re: What is a good zinc additive for oil?
[Re: MI_Custumz]
#2243067
01/28/17 10:20 PM
01/28/17 10:20 PM
|
Joined: Apr 2012
Posts: 18,880 -
RSNOMO
Moparts Torchbearer
|
Moparts Torchbearer
Joined: Apr 2012
Posts: 18,880
-
|
I'm not really good at some mechanical stuff. The price difference between ZR-1 and conventional isn't that much of a difference. I did stop by NAPA and talked to a guy in there and he said high mileage has more zinc, but according to Valvoline online high mileage (max life) has zinc/phosphorus% of .083/.077, conventional is .083/.076, and ZR-1 is .14/.13. Looks like ZR-1 has the most. I don't have the mechanical know how on lots of things, but wish I had learned more when my dad was working on cars. I usually take it to someone to get stuff done if I can't figure it out. I could call the shop that works on it and see if they know from what they've done on it. I wouldn't even know what to look for if I took off a valve cover to be honest.
Easy solution... As long as there ain't any cats, use an oil fortified with ZDDP... No worries...
|
|
|
Re: What is a good zinc additive for oil?
[Re: MI_Custumz]
#2243166
01/29/17 12:47 AM
01/29/17 12:47 AM
|
Joined: Nov 2005
Posts: 1,943 San Angelo, Texas, U.S.A.
1968RR
top fuel
|
top fuel
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
|
Ok, one last dumb question. If I am using 10W30 now, would SAE30 be the same viscosity? I don't drive it in the winter. I bring it home in March/April and park it in October/November depending on when I can get it to the storage unit. It sits all winter and isn't started. Wife stopped at O'Reilly to look for me and they have SAE30 and 20W50. Site shows 10W30, but they don't carry it. Amazon has it for $34.77 for 6 quarts. 10W30 and SAE 30 are not the same, but you should be fine running the SAE 30.
"When I'm in a slump, I comfort myself by saying if I believe in dinosaurs, then somewhere, they must be believing in me. And if they believe in me, then I can believe in me." - Mookie Wilson
|
|
|
Re: What is a good zinc additive for oil?
[Re: 1968RR]
#2243255
01/29/17 04:29 AM
01/29/17 04:29 AM
|
Joined: Sep 2014
Posts: 4,457 Washington
madscientist
master
|
master
Joined: Sep 2014
Posts: 4,457
Washington
|
Ok, one last dumb question. If I am using 10W30 now, would SAE30 be the same viscosity? I don't drive it in the winter. I bring it home in March/April and park it in October/November depending on when I can get it to the storage unit. It sits all winter and isn't started. Wife stopped at O'Reilly to look for me and they have SAE30 and 20W50. Site shows 10W30, but they don't carry it. Amazon has it for $34.77 for 6 quarts. 10W30 and SAE 30 are not the same, but you should be fine running the SAE 30. They are exactly the same, a 30 grade oil. The difference is as ambient temp drops, the 10w30 will act like a 10 grade oil. As the oil temp goes up, the 10w30 will GAIN viscosity. There is no reason to ever use a single grade engine oil. Ever.
Just because you think it won't make it true. Horsepower is KING. To dispute this is stupid. C. Alston
|
|
|
|
|