Re: any issues putting a 360 magnum in to a 74 e body?
[Re: 05dakota]
#2211416
12/10/16 07:52 PM
12/10/16 07:52 PM
|
Joined: Jan 2003
Posts: 17,871 albany ny
05dakota
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 17,871
albany ny
|
still cant find that m1 intake
5549 post on old board
|
|
|
Re: any issues putting a 360 magnum in to a 74 e body?
[Re: 05dakota]
#2211503
12/10/16 09:42 PM
12/10/16 09:42 PM
|
Joined: Nov 2003
Posts: 12,521 Western Colorado High Desert
moparmarks
I Live Here
|
I Live Here
Joined: Nov 2003
Posts: 12,521
Western Colorado High Desert
|
I have a M1 that I'd sell if I get an Edelbrock for mine. Also to correct myself, 340 E/manifolds do fit on the Magnum heads as well as the 340 valve covers. I'm also looking for some of the black cast MP 10 bolt Magnum valve covers.
72 Satellite Sebring Plus 440, 72 Dart 5.9 4-spd, 68 Valiant, 73 W200, 78 D100 sb, 78 D200, 98 DAKOTA, . Moparmarks Parts & Restorations Desert Mopar Metal Grand Jct. CO 970-261-7039 http://moparmark.com/motormangj@gmail.com
|
|
|
Re: any issues putting a 360 magnum in to a 74 e body?
[Re: 05dakota]
#2211924
12/11/16 05:11 PM
12/11/16 05:11 PM
|
Joined: Jan 2003
Posts: 17,871 albany ny
05dakota
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 17,871
albany ny
|
Cana pro former intake manifold be drilled to fit magnum heads??n
5549 post on old board
|
|
|
Re: any issues putting a 360 magnum in to a 74 e body?
[Re: moparmarks]
#2212081
12/11/16 09:16 PM
12/11/16 09:16 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
Never tried it but I read once where a guy drilled down vertical into the LA intake then used spacers under the bolt head with an angle on the lower side of the spacer to match the angle on the LA intake. If I did not have a Mag intake I would try it
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: any issues putting a 360 magnum in to a 74 e body?
[Re: 05dakota]
#2212133
12/11/16 09:59 PM
12/11/16 09:59 PM
|
Joined: Jan 2003
Posts: 8,559 Candler,NC / Myrtle Beach, SC
JDMopar
master
|
master
Joined: Jan 2003
Posts: 8,559
Candler,NC / Myrtle Beach, SC
|
Ted, Edelbrock makes a Performer RPM Airgap for Magnum motors. Summit sells a Chinese knockoff called a Crosswind. A long time ago, a Moparts member had a jig to redrill Magnum heads to fit an LA intake. If I remember right, it disappeared and has never been seen again. Check on Rock Auto for a 5.9 flex plate. The harmonic balancer and the flex plate have to match on Magnum motors. As for Magnum exhaust manifolds, there are different versions. The most common have 1 7/8 exits, and the better ones have larger openings. 2 1/4, I think?
|
|
|
Re: any issues putting a 360 magnum in to a 74 e body?
[Re: JDMopar]
#2212146
12/11/16 10:11 PM
12/11/16 10:11 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
I was one of the ones who rented the "jig" when it was in circulation. I think a person could mockup the LA intake on the longblock then make a centerpunch mark down the LA intake manifold holes onto the head deck surface then remove the intake/heads & drill/tap the heads in that location(s) which was what the jig did. If the area on the heads you would be drilling into was solid it would work fine (with the jig it was borderline)
live every 24 hour block of time like it's your last day on earth
|
|
|
|
|