Master Cylinder - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Master Cylinder

Print Thread

Master Cylinder #2118387 07/26/16 07:36 PM 07/26/16 07:36 PM
Joined: Jan 2003 Posts: 1,013 LEE, MASS T TOMRR OP super stock
TOMRR OP super stock T Joined: Jan 2003 Posts: 1,013 LEE, MASS	Ok on the new Master Cylinder there is a Piston Retainer !! Does that stay on or do you remove before installing MC. Thanks Tom C Last edited by TOMRR; 07/26/16 07:54 PM.

Re: Master Cylinder [Re: TOMRR] #2118400 07/26/16 08:05 PM 07/26/16 08:05 PM
Joined: Jun 2003 Posts: 21,453 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,453 It's a dry heat	stays on

Re: Master Cylinder [Re: gtx6970] #2118410 07/26/16 08:16 PM 07/26/16 08:16 PM
Joined: Jan 2003 Posts: 1,013 LEE, MASS T TOMRR OP super stock
TOMRR OP super stock T Joined: Jan 2003 Posts: 1,013 LEE, MASS	Thanks for the reply, I found my problem ,I took if off thinking that it was just to hold piston in place for shipping

Re: Master Cylinder [Re: TOMRR] #2118967 07/27/16 12:15 PM 07/27/16 12:15 PM
Joined: Sep 2003 Posts: 7,833 east side of Ohio basketcase master
basketcase master Joined: Sep 2003 Posts: 7,833 east side of Ohio	that's just for shipping, remove it. Dave 1981 Dodge D150 360 auto

Re: Master Cylinder [Re: TOMRR] #2118998 07/27/16 12:49 PM 07/27/16 12:49 PM
Joined: Jan 2003 Posts: 1,013 LEE, MASS T TOMRR OP super stock
TOMRR OP super stock T Joined: Jan 2003 Posts: 1,013 LEE, MASS	Stay on ???/ Remove ?? any one Know for Sure ???

Re: Master Cylinder [Re: TOMRR] #2119013 07/27/16 01:09 PM 07/27/16 01:09 PM
Joined: Dec 2005 Posts: 885 alberta Publicbottle super stock
Publicbottle super stock Joined: Dec 2005 Posts: 885 alberta	haha classic internet. I left mine on...

Re: Master Cylinder [Re: Publicbottle] #2119023 07/27/16 01:19 PM 07/27/16 01:19 PM
Joined: Jan 2003 Posts: 1,013 LEE, MASS T TOMRR OP super stock
TOMRR OP super stock T Joined: Jan 2003 Posts: 1,013 LEE, MASS	Originally Posted By Publicbottle haha classic internet. I left mine on... I think you are Right !! I believe it is to stops the piston from coming to far out when the Brake Padel returns

Re: Master Cylinder [Re: TOMRR] #2119032 07/27/16 01:33 PM 07/27/16 01:33 PM
Joined: Feb 2003 Posts: 1,306 Laveen, Arizona GTSDart340 pro stock
GTSDart340 pro stock Joined: Feb 2003 Posts: 1,306 Laveen, Arizona	If it's manual brakes, that's where a retainer bolts. Not sure about power though. 1949 International KB-2 "Mater" - 302/T5 1968 Dodge Dart GTS "The Drat" - 340/727 2006 Dodge Magnum R/T - Hemi 2016 Dodge Durango Limited - 3.6

Re: Master Cylinder [Re: GTSDart340] #2119173 07/27/16 04:48 PM 07/27/16 04:48 PM
Joined: Jan 2003 Posts: 43,594 Round Lake Beach, Illinoisy Rhinodart Rhinotruck
Rhinodart Rhinotruck Joined: Jan 2003 Posts: 43,594 Round Lake Beach, Illinoisy	THere is a retainer with a boot that bolts to that position, take it off and use the proper parts! http://www.ebay.com/itm/64-74-Mopar-A-B-...-/262535686636? Last edited by Rhinodart; 07/27/16 04:49 PM. The funny thing about science is that if you change one miniscule parameter you change the entire outcome to the way you want it. JB Rhinehart, Realist A-Body's RULE!

Re: Master Cylinder [Re: Rhinodart] #2119322 07/27/16 08:16 PM 07/27/16 08:16 PM
Joined: Jan 2003 Posts: 25,899 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,899 Rio Linda, CA	OP never stated if it's a manual or power brake car. The keeper can remain in place either way, lots of us run manual with no pushrod bellows. The INTERNET, the MISinformation superhighway

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1