Re: Valve Cover Gaskets W-9 with big springs
[Re: 340Cuda]
#2101096
06/30/16 01:19 PM
06/30/16 01:19 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Does anybody know of a narrow valve cover gasket that can be used with 1.680" O.D springs on a W-9 head that do not need to be trimmed to clear the springs?
Thanks! Bill Lamb I used the MP gaskets(silicone over metal) and had to grind for each spring... I havent heard of any narrow ones EDIT I also had to clearance the reverse lip MP valve covers
Last edited by MR_P_BODY; 06/30/16 01:20 PM.
|
|
|
Re: Valve Cover Gaskets W-9 with big springs
[Re: 340Cuda]
#2101119
06/30/16 02:06 PM
06/30/16 02:06 PM
|
Joined: Oct 2007
Posts: 3,978 Hilltown Pa
1967dartgt
master
|
master
Joined: Oct 2007
Posts: 3,978
Hilltown Pa
|
Cometic makes a w9 valve cover gasket, and all pro makes a valve cover. W9 use the same bolt pattern as stock but they moved the front and rear rail. So if you want it to be correct get those.
Last edited by 1967dartgt; 06/30/16 02:08 PM.
Brett Miller W9 cnc'd heads STR Chassis fabraction
|
|
|
Re: Valve Cover Gaskets W-9 with big springs
[Re: 340Cuda]
#2101906
07/01/16 02:58 PM
07/01/16 02:58 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Mike,
I was able to find some valve covers that I did not have to clearance, but was trying to avoid chopping the gaskets again.
Brett, Thanks I will look into both of those gaskets, at least they may not need to be trimmed as much.
Bill I never changed gaskets all the years I ran my W-9 so I only cut 1 set EDIT I mod a set of MP cast covers
Last edited by MR_P_BODY; 07/01/16 03:00 PM.
|
|
|
Re: Valve Cover Gaskets W-9 with big springs
[Re: 340Cuda]
#2102842
07/03/16 04:06 AM
07/03/16 04:06 AM
|
Joined: Oct 2007
Posts: 3,978 Hilltown Pa
1967dartgt
master
|
master
Joined: Oct 2007
Posts: 3,978
Hilltown Pa
|
Mike,
I was able to find some valve covers that I did not have to clearance, but was trying to avoid chopping the gaskets again.
Brett, Thanks I will look into both of those gaskets, at least they may not need to be trimmed as much.
Bill They will not need to be trimmed at all, they are the same width as the rail on your head.
Brett Miller W9 cnc'd heads STR Chassis fabraction
|
|
|
Re: Valve Cover Gaskets W-9 with big springs
[Re: 1967dartgt]
#2103142
07/03/16 05:27 PM
07/03/16 05:27 PM
|
Joined: Apr 2003
Posts: 3,527 Tulsa, Oklahoma
340Cuda
OP
master
|
OP
master
Joined: Apr 2003
Posts: 3,527
Tulsa, Oklahoma
|
They will not need to be trimmed at all, they are the same width as the rail on your head. Brent, Am I correct that Cometic has two gaskets a W-2, W-5, W-7, W-9 model and a W-8 model? I was expecting a W-9 only model and I am not finding it. Thanks, Bill
|
|
|
Re: Valve Cover Gaskets W-9 with big springs
[Re: W5DART66]
#2103493
07/04/16 11:39 AM
07/04/16 11:39 AM
|
Joined: Apr 2003
Posts: 3,527 Tulsa, Oklahoma
340Cuda
OP
master
|
OP
master
Joined: Apr 2003
Posts: 3,527
Tulsa, Oklahoma
|
C5784-60
This is part number you need for w9 "Cometic Midget & Sprint Valve Cover Gasket" Thanks I never would have found it looking for W-9... Bill
|
|
|
Re: Valve Cover Gaskets W-9 with big springs
[Re: LA360]
#2104047
07/05/16 01:52 AM
07/05/16 01:52 AM
|
Joined: Oct 2007
Posts: 3,978 Hilltown Pa
1967dartgt
master
|
master
Joined: Oct 2007
Posts: 3,978
Hilltown Pa
|
How much was the top and rear rails narrowed? I am looking at doing some billet valve covers Get gasket and use that as a template. They changed a lot.
Brett Miller W9 cnc'd heads STR Chassis fabraction
|
|
|
Re: Valve Cover Gaskets W-9 with big springs
[Re: 1967dartgt]
#2113602
07/19/16 09:40 PM
07/19/16 09:40 PM
|
Joined: Jan 2003
Posts: 6,149 Melbourne , Australia
LA360
master
|
master
Joined: Jan 2003
Posts: 6,149
Melbourne , Australia
|
I found some info on the Cometic gasket site that I will use. I will have to order some gaskets to be sure
Alan Jones
|
|
|
|
|