Amother don't look 512 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Amother don't look 512

Print Thread

Page 2 of 2

1

2

Re: Amother don't look 512 [Re: dynamite] #2089387 06/09/16 11:15 PM 06/09/16 11:15 PM
Joined: Oct 2009 Posts: 1,267 North, Alabama D-50 pro stock
D-50 pro stock Joined: Oct 2009 Posts: 1,267 North, Alabama	I have run aluminum roller rockers on my street and race cars for 20+ years with thousands of miles and never had a failure so far. I used Crane for 15 years and I am using T&D on my small block now. 1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...

Re: Amother don't look 512 [Re: dynamite] #2089426 06/10/16 12:15 AM 06/10/16 12:15 AM
Joined: Feb 2011 Posts: 27 GA B baracus member
baracus member B Joined: Feb 2011 Posts: 27 GA	Anyone have any experience with the mancini racing rollers? They are made by HS. Good price.

Re: Amother don't look 512 [Re: dynamite] #2089434 06/10/16 12:23 AM 06/10/16 12:23 AM
Joined: Jun 2006 Posts: 5,164 CT GTX MATT master
GTX MATT master Joined: Jun 2006 Posts: 5,164 CT	That is what I'm running on my 440. I've got about 5000 miles on them now with no problems. My springs are less than 400 lbs open though. I thought they were nice. Last edited by GTX MATT; 06/10/16 12:23 AM. Now I need to pin those needles, got to feel that heat Hear my motor screamin while I'm tearin up the street

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1