Previous Thread
Next Thread
Print Thread
Help me identify this Air Grabber lid #2065331
05/01/16 03:25 PM
05/01/16 03:25 PM
Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
69HemiGTX Offline OP
master
69HemiGTX  Offline OP
master

Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
I've been out of the muscle era stuff for a while, so I'm a little rusty. I bought this air filter lid years ago. From what I can tell, it's off a 71 Plymouth. I'm focusing on the remains of the factory Coyote Duster decal for identification. If you look close at the detail pic, you can see the decal is still there, but the ink is gone. Right click the pic and open it in a new tab to see it bigger. A little bit of ink is on the lower right, and it's yellow, not tan like the 69-70 decal. Also, the upper left portion is very rounded, just like the dust cloud on the 71 decal. The early decal is squared off, which looks completely different from this one. From what I've seen, the 71 383 cars had a round lid. What about a 4bbl GTX? Would it have had this lid? Would a GTX even have had a Coyote Duster decal? I thought that was a Road Runner only deal. I know it's not a 440+6 lid because the recesses are too close together. The only other possibility is that it came off a Hemi.

20160430_131441.jpg20160430_131525.jpg

OIF V and OEF X veteran and proud of it!
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065339
05/01/16 03:37 PM
05/01/16 03:37 PM
Joined: Apr 2012
Posts: 18,880
-
R
RSNOMO Offline
Moparts Torchbearer
RSNOMO  Offline
Moparts Torchbearer
R

Joined: Apr 2012
Posts: 18,880
-
$

2015-smmc-joseph-1971-plymouth-gtx-engine.jpg
Re: Help me identify this Air Grabber lid [Re: RSNOMO] #2065345
05/01/16 03:43 PM
05/01/16 03:43 PM
Joined: Feb 2003
Posts: 8,020
Pangaea
B5 Bee Offline
master
B5 Bee  Offline
master

Joined: Feb 2003
Posts: 8,020
Pangaea
also 1969 B/RB




Last edited by B5 Bee; 05/01/16 03:45 PM.
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065346
05/01/16 03:43 PM
05/01/16 03:43 PM
Joined: Dec 2003
Posts: 4,954
northwest USA
N
NANKET Offline
master
NANKET  Offline
master
N

Joined: Dec 2003
Posts: 4,954
northwest USA
69 383/440 air grabber & ramcharger hood b-body
69-71 Hemi

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065388
05/01/16 05:10 PM
05/01/16 05:10 PM
Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
69HemiGTX Offline OP
master
69HemiGTX  Offline OP
master

Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
I know it was available on the 69-70 cars, but what makes me think it's from a 71 is the decal. Did anyone actually read what I was talking about? Was this cover available on either a 383 or 440 4bbl in 71?

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065405
05/01/16 05:49 PM
05/01/16 05:49 PM
Joined: Aug 2004
Posts: 4,247
Alabama
BigMoneyLewis Offline
master
BigMoneyLewis  Offline
master

Joined: Aug 2004
Posts: 4,247
Alabama
Coyote Duster decal only used on Road Runners , with N96 .
A 1971 Air Grabber Road Runner used the round lid , unless it was a Hemi .
The stud hole location is different than a 440+6 if I remember right.
My guess is it came on a 1969 Road Runner.

Greg


gregward@mchsi.com phone 256-852-0955
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065565
05/01/16 09:52 PM
05/01/16 09:52 PM
Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
69HemiGTX Offline OP
master
69HemiGTX  Offline OP
master

Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
It has a 71 decal on it, so it's not a 69.

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065622
05/01/16 11:08 PM
05/01/16 11:08 PM
Joined: Jan 2005
Posts: 340
Ohio
T
tak Offline
enthusiast
tak  Offline
enthusiast
T

Joined: Jan 2005
Posts: 340
Ohio
It's not a 71 lid. The Road Runner and GTX both had the round lid with the 383 or 440-4barrel, owned many 71 airgrabber cars, all round lids except the hemi and 6. And I believe most the 70's also received the round lid with 4 barrel. The lid you have is definitely a 4 barrel lid, the 6 barrel had the rear hole farther back. Looks like a 69 or possibly an early 70.

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065673
05/02/16 12:32 AM
05/02/16 12:32 AM
Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
69HemiGTX Offline OP
master
69HemiGTX  Offline OP
master

Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
Again, it obviously has a 71 Coyote Duster decal on it. I find it hard to believe someone would buy a new style decal and put it on a 69-70 part just to cover it up with a bunch of cheap stickers.

Here are the 71 and 69-70 Coyote Duster decals, respectively. Look at their outlines, and it's easy to see mine has a 71 decal.

$_57.jpgRunner.jpg
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065690
05/02/16 01:20 AM
05/02/16 01:20 AM
Joined: Aug 2004
Posts: 4,247
Alabama
BigMoneyLewis Offline
master
BigMoneyLewis  Offline
master

Joined: Aug 2004
Posts: 4,247
Alabama
So perhaps someone went in to the dealer in 1973 and bought the 1971 style decal , put it on their 1969 air cleaner lid , peeled it off in 1976 and added the Fram, Carter, Thrush etc. decals ? Bottom line, it's not a lid that was installed on a 1971 Road Runner from the factory , unless it was a Hemi .

Greg

Last edited by BigMoneyLewis; 05/02/16 01:22 AM.

gregward@mchsi.com phone 256-852-0955
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065693
05/02/16 01:24 AM
05/02/16 01:24 AM
Joined: Aug 2004
Posts: 4,247
Alabama
BigMoneyLewis Offline
master
BigMoneyLewis  Offline
master

Joined: Aug 2004
Posts: 4,247
Alabama
It would make a great piece of man cave wall art , that's for sure .

Greg


gregward@mchsi.com phone 256-852-0955
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065697
05/02/16 01:31 AM
05/02/16 01:31 AM
Joined: Mar 2008
Posts: 9,550
Sacramento CA
M
Morty426 Offline
master
Morty426  Offline
master
M

Joined: Mar 2008
Posts: 9,550
Sacramento CA
Can you measure the hole spacing?

It looks like a 71 Hemi top to me.

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065720
05/02/16 03:43 AM
05/02/16 03:43 AM
Joined: Dec 2003
Posts: 4,954
northwest USA
N
NANKET Offline
master
NANKET  Offline
master
N

Joined: Dec 2003
Posts: 4,954
northwest USA
Your title asks to help you id the lid not the sticker. bigmoneylewis told the story real fine.

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065780
05/02/16 10:04 AM
05/02/16 10:04 AM
Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
69HemiGTX Offline OP
master
69HemiGTX  Offline OP
master

Joined: May 2003
Posts: 3,266
Pyeongtaek, South Korea
I understand the possibility of the sticker being put there by someone, but I don't know who would spend the money on one just to cover it up. If they were to have taken it off, I'm sure they would have taken off the yellow Mopar decal at the top, too. The fact is it's still there. Look closely at the detail pic. Most of the ink is gone, but the actual vinyl is still firmly attached to the lid. What I'm trying to determine is the likelihood it came off a Hemi Road Runner. I may never know for sure, but a definitive answer against it is impossible. Either way, it's just as you said, a nice piece of wall art.

Morty426, the spacing is for the 69-70 383/440 4bbl and 69-71 Hemi.

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2065965
05/02/16 02:27 PM
05/02/16 02:27 PM
Joined: Dec 2003
Posts: 4,954
northwest USA
N
NANKET Offline
master
NANKET  Offline
master
N

Joined: Dec 2003
Posts: 4,954
northwest USA
Impossible to know, we were not there. You ever take a statistics class?

70-71 383/440 4 bbl used a round lid, the oval was only 1969 on a single 4bbl.

Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2066036
05/02/16 04:31 PM
05/02/16 04:31 PM
Joined: Jan 2003
Posts: 75,343
A gulag near you.
JohnRR Offline
I Win
JohnRR  Offline
I Win

Joined: Jan 2003
Posts: 75,343
A gulag near you.
Originally Posted By 69HemiGTX
I know it was available on the 69-70 cars, but what makes me think it's from a 71 is the decal. Did anyone actually read what I was talking about? Was this cover available on either a 383 or 440 4bbl in 71?


No , HEMI only in 71 .


Mainstream Media is the new Pravda
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2066040
05/02/16 04:34 PM
05/02/16 04:34 PM
Joined: Jan 2003
Posts: 75,343
A gulag near you.
JohnRR Offline
I Win
JohnRR  Offline
I Win

Joined: Jan 2003
Posts: 75,343
A gulag near you.
Originally Posted By 69HemiGTX
I understand the possibility of the sticker being put there by someone, but I don't know who would spend the money on one just to cover it up. If they were to have taken it off, I'm sure they would have taken off the yellow Mopar decal at the top, too. The fact is it's still there. Look closely at the detail pic. Most of the ink is gone, but the actual vinyl is still firmly attached to the lid. What I'm trying to determine is the likelihood it came off a Hemi Road Runner. I may never know for sure, but a definitive answer against it is impossible. Either way, it's just as you said, a nice piece of wall art.

Morty426, the spacing is for the 69-70 383/440 4bbl and 69-71 Hemi.


First off what leads you to believe that only 1 person besides yourself would have owned it ?

It would be better if you were able to remove the telltales of the 71 sticker, then you could claim it's a 71 E body Hemi lid $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$


Mainstream Media is the new Pravda
Re: Help me identify this Air Grabber lid [Re: 69HemiGTX] #2066118
05/02/16 07:13 PM
05/02/16 07:13 PM
Joined: Jan 2003
Posts: 20,409
Park Forest, IL
slantzilla Offline
Too Many Posts
slantzilla  Offline
Too Many Posts

Joined: Jan 2003
Posts: 20,409
Park Forest, IL
My friends and I used to buy every sticker we could get our hands on and put them on anything that didn't move. I bet we weren't the only ones who did. devil


"Everybody funny, now you funny too."






Powered by UBB.threads™ PHP Forum Software 7.7.1