I had a bunch of Glasstek stuff for a Duster. It was all very nice.

I got a challenger TA style scoop from Unlimited a few years back and it was very nice and didn't need much work at all to look good. I wasn't going for light weight though... it was just a scoop, but a large one. I called a few times to push them to get it done, didn't take too long.

Price wise Glasstek is right there with everybody else. The difference is that your bodyman will love you after seeing the parts.

I have Glasstek bumpers and they look good and are light.

I've bought two 1970 Cuda race weight hoods with two different tunnel ram scoops for my Cuda, both hoods where excellent on fit and finish from Unlimited on Thumperdarts recommendationOp, I bought a Two Duster race weight hoods from Fibreglas trends years ago and I molded in some aluminum angle in the rear of those hoods to make it bolt up and work on the stock Duster hnges with no springs, that worked good also

Ok, how about we throw another one into the mix......
How about USbody Source?
They look decent, and have good shipping.
I've probably made up my mind, I just want to be 100% sure as this is the first fiberglass part I've ever bought!!
Thanks again to everyone!!

Wally.

Just spent 3 months last summer straightening a pair of fenders from US Source. I will never use their product again.

I had one of unlimited T/A bolt on hoods years ago it was nice,what I did like was the attention to detail just prime/painted.

Glasstek is the owner from VFN's son. I have heard good stuff about both and I have a VFN hood and it's pretty good quality but I also supplied the the hood for the mold. I have seen a few others with the same hood and they have been very pleased. I also live 10 minutes from VFN so i can be picky.

I had Unlimited Products fenders and trunk lid plus a Harwood hood on my Dart. Quality was so so on all. Unlimited had used cardboard tubes for reinforcing the trunk which still had a big dip in it. Harwood had cut the one edge of the hood wrong. While my Dart was in the body shop, it was in a wreck. (LOOONNNNGGG story.) Had to replace all the glass parts. Trunk lid was spidered all over, Driver's fender had a huge chunk out of it, the hood was spider webbed. The pass. fender was ok, but I figured if I got one new one, I may as well get a pair.

I bought all Glasstek stuff. What a difference. My bodyman couldn't believe the quality of the Glasstek stuff. He had to do very little work to get it ready for paint vs. the amount of time he had wrapped up in the other stuff.

I bought my hood, deck lid, doors and valances from Glasstech, I highly recommend them. Fenders were from somewhere else (don't remember) Glasstech stuff as nicer

Went to Glasstek in Naperville IL. today.
What a group of nice guys.
Got the dime tour, although not much to see except A LOT of molds for darn near everything you can think of, it was very impressive to me.
It's a horrible dirty messy job to make fiberglass parts, so I didn't stay long where the actual process was taking place, but looking at all of the pieces that were made for stock or display was cool, and simple to tell the quality and craftsmanship put into each piece.
So I ordered a bolt on hood for my Demon with the standard height 6 pack hood scoop.
Cash deal, each piece is custom made per order, I'll pick it up in 6-8 weeks (busy time of year) pay when I pick it up, they deal on a handshake.
If I go with anything fiberglass ever, it will only be from Glasstek.

I brought bumpers from unlimited fiberglass last year,biggest trash I ever seen

Its all about the molds... anyone can lay down the
mat and resin to make a nice part

Unlimited front bumper here.... got it last year. Painted and installed. I'm getting a rear bumper from them and also am going to get a lighter hood w/t cowl from them. Present hood is a VFN and it's HEAVY!

Hanging the bumpers on these nice aluminum brackets:



http://lingenfeltersbrackets.com/

J Body. That bumper looks nice. I have all Unlimited body parts, too. I need some new bumper brackets. Thanks for the link to Lingenfelter Brackets. That stuff is trick. Getting in contact with them this weekend.

Jeffs just a mopar guy that made a couple sets for some people and it kind of took off. Just something he does on the side in his garage. Nice stuff and they fit!

How much does he charge for a set of brackets? They look nice!

Go online. They vary. Prices are pretty reasonable. Sells aluminum cage bolt kits and aluminum fender supports also.

AAR fiberglass without hesitation !
perfect parts