I bought a fuel pump to carb lin set from inline tube for a 68 426 hemi I am building for a customer. It did not include the fittings or the fuel line retainer that mounts at the coil location. I know I can get the fittings seperately, but I was wondering if anybody knew whether the retainer was available seperately anywhere. Thanks in advance.

Not that I'm aware because they are crimped over the line. BTW, I wouldn't buy them from that supplier, the bracket is the wrong finish, they were raw steel, not that funky black phosphate finish as in your example.

These are better: Fuel Line Source

Thanks for the link. I was hoping to get just the retainer, but looks like I will have to order the entire kit.

I know ECS has that bracket listed on their site.
Part # CMP36. $23 says for 66-71, are they really all the same?
Says no picture avail, but it has the pic under clutch bracket a few items before this in the list.

They have many interesting trinkets there under "Metal Parts"
Also the bracket for 440+6 idle solenoid wire some one else wanted last week.

A HA! Yes there it is. Thank you very much. I would have never thought to look at ECS for that. They have a couple other small things on there that I need as well

Neither did I and I buy stuff from them all the time! LOL!

That is how they are supposed to look BTW

Maybe it is the correct size & shape too!

Yep ECS has many cool things that other do not.