with all the BS I'm going for it. Eldebrock Victor head rant - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech with all the BS I'm going for it. Eldebrock Victor head rant

Print Thread

Page 2 of 2

1

2

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: justinp61] #2001572 01/29/16 10:38 PM 01/29/16 10:38 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Originally Posted By justinp61 Originally Posted By MattW Originally Posted By sixpackgut or you could just go to the junkyard and get some hemi heads if you want 330cfm THIS IS WERE YOU SHOULD BE HEADING!!!!!!! Easy as pie. Would love to see what your car would do with a minimum effort on a G3. Matt Unless something changes my next one will be a GenIII. I'm surprised that more people haven't made the switch. for one reason only..... PARTS AVAILABILITY!!!!! Matt

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: pittsburghracer] #2001576 01/29/16 10:44 PM 01/29/16 10:44 PM
Joined: Oct 2003 Posts: 11,704 W. Kentucky justinp61 I Live Here
justinp61 I Live Here Joined: Oct 2003 Posts: 11,704 W. Kentucky	Matt you are absolutely right on the parts. That's the reason I didn't go that route this time. Also it seems that a lot of guys that know the GenIII stuff aren't talking unless you're buying something. So I went with a R1 Indy head deal.

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: MattW] #2001584 01/29/16 10:55 PM 01/29/16 10:55 PM
Joined: Feb 2005 Posts: 20,279 PA. pittsburghracer OP "Little"John
pittsburghracer OP "Little"John Joined: Feb 2005 Posts: 20,279 PA.	Originally Posted By MattW Originally Posted By sixpackgut or you could just go to the junkyard and get some hemi heads if you want 330cfm THIS IS WERE YOU SHOULD BE HEADING!!!!!!! Easy as pie. Would love to see what your car would do with a minimum effort on a G3. Matt I would have a lot money in G3 to run what I do with my 360-1 set-up. It went 6.02@113mph and I found more ET right after that and I still have a solid lift cam in that engine. Last edited by pittsburghracer; 01/29/16 10:56 PM. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.38@138.67 Livin and lovin life one day at a time

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: justinp61] #2001586 01/29/16 11:01 PM 01/29/16 11:01 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Originally Posted By justinp61 Matt you are absolutely right on the parts. That's the reason I didn't go that route this time. Also it seems that a lot of guys that know the GenIII stuff aren't talking unless you're buying something. So I went with a R1 Indy head deal. RAMM and I put together a W9 for engine masters. Or should I say He put it together and I supplied the parts. LOL Hopefully we will have some G3 builds this year. I'm thinking with the amount of $$$$ that went into the W9 I could of done the same with less with a G3. Now keep in mind, IMO there is a limit to all this. Sub 750 hp and I believe a G3 would be cheaper. Anything north of that and everything would be big $$$$.

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: MattW] #2001588 01/29/16 11:03 PM 01/29/16 11:03 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Which brings me to the topic at hand. Even if the victors are a home run and flow 360 out of the box, we still don't have a good block to use. Matt

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: pittsburghracer] #2001592 01/29/16 11:08 PM 01/29/16 11:08 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Originally Posted By pittsburghracer Originally Posted By MattW Originally Posted By sixpackgut or you could just go to the junkyard and get some hemi heads if you want 330cfm THIS IS WERE YOU SHOULD BE HEADING!!!!!!! Easy as pie. Would love to see what your car would do with a minimum effort on a G3. Matt I would have a lot money in G3 to run what I do with my 360-1 set-up. It went 6.02@113mph and I found more ET right after that and I still have a solid lift cam in that engine. I don't know. Your car is light. I think you maybe surprised. But to be honest I have no proof. lol I'm a keyboard junkie. lol Would love to see what you could accomplish with a G3 setup!

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: pittsburghracer] #2001619 01/29/16 11:40 PM 01/29/16 11:40 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	Originally Posted By pittsburghracer Originally Posted By MattW Originally Posted By sixpackgut or you could just go to the junkyard and get some hemi heads if you want 330cfm THIS IS WERE YOU SHOULD BE HEADING!!!!!!! Easy as pie. Would love to see what your car would do with a minimum effort on a G3. Matt I would have a lot money in G3 to run what I do with my 360-1 set-up. It went 6.02@113mph and I found more ET right after that and I still have a solid lift cam in that engine. Your 422 is .12 quicker than the 408 and your just dying to spend 5k on victor heads when you could buy brand new hemi heads that will outflow them for $1200. Where you come up will the expensive hemi comedy routine every time is beyond me Last edited by sixpackgut; 01/29/16 11:43 PM. Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: sixpackgut] #2001626 01/29/16 11:49 PM 01/29/16 11:49 PM
Joined: Feb 2005 Posts: 20,279 PA. pittsburghracer OP "Little"John
pittsburghracer OP "Little"John Joined: Feb 2005 Posts: 20,279 PA.	Originally Posted By sixpackgut Originally Posted By pittsburghracer Originally Posted By MattW [quote=sixpackgut]or you could just go to the junkyard and get some hemi heads if you want 330cfm THIS IS WERE YOU SHOULD BE HEADING!!!!!!! Easy as pie. Would love to see what your car would do with a minimum effort on a G3. Matt I would have a lot money in G3 to run what I do with my 360-1 set-up. It went 6.02@113mph and I found more ET right after that and I still have a solid lift cam in that engine. Your 422 is .12 quicker than the 408 and your just dying to spend 5k on victor heads when you could buy brand new hemi heads that will outflow them for $1200. Where you come up will the expensive hemi comedy routine every time is beyond me [/quote I have 7500 in my 422 and it's nowhere near a maxed out effort and that includes the cost of the R3 block and way less in the 408 stock block engine. Every hemi build I see has been pretty expensive starting with the core costs to get the project moving along 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.38@138.67 Livin and lovin life one day at a time

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: pittsburghracer] #2001629 01/29/16 11:53 PM 01/29/16 11:53 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	Originally Posted By pittsburghracer Originally Posted By sixpackgut Originally Posted By pittsburghracer Originally Posted By MattW [quote=sixpackgut]or you could just go to the junkyard and get some hemi heads if you want 330cfm THIS IS WERE YOU SHOULD BE HEADING!!!!!!! Easy as pie. Would love to see what your car would do with a minimum effort on a G3. Matt I would have a lot money in G3 to run what I do with my 360-1 set-up. It went 6.02@113mph and I found more ET right after that and I still have a solid lift cam in that engine. Your 422 is .12 quicker than the 408 and your just dying to spend 5k on victor heads when you could buy brand new hemi heads that will outflow them for $1200. Where you come up will the expensive hemi comedy routine every time is beyond me [/quote I have 7500 in my 422 and it's nowhere near a maxed out effort and that includes the cost of the R3 block and way less in the 408 stock block engine. Every hemi build I see has been pretty expensive starting with the core costs to get the project moving along Ok, congrats. You got a good deal on parts. I bought my 426 short block for 2k. So call it what it is, you have alot of good parts you bought in the 80s for dirt cheap and to start over would not make your wallet happy paying 2016 prices Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: pittsburghracer] #2001636 01/30/16 12:03 AM 01/30/16 12:03 AM
Joined: Dec 2006 Posts: 3,415 Pa Hot 340 master
Hot 340 master Joined: Dec 2006 Posts: 3,415 Pa	Originally Posted By pittsburghracer Originally Posted By sixpackgut Originally Posted By pittsburghracer Originally Posted By MattW [quote=sixpackgut]or you could just go to the junkyard and get some hemi heads if you want 330cfm THIS IS WERE YOU SHOULD BE HEADING!!!!!!! Easy as pie. Would love to see what your car would do with a minimum effort on a G3. Matt I would have a lot money in G3 to run what I do with my 360-1 set-up. It went 6.02@113mph and I found more ET right after that and I still have a solid lift cam in that engine. Your 422 is .12 quicker than the 408 and your just dying to spend 5k on victor heads when you could buy brand new hemi heads that will outflow them for $1200. Where you come up will the expensive hemi comedy routine every time is beyond me [/quote I have 7500 in my 422 and it's nowhere near a maxed out effort and that includes the cost of the R3 block and way less in the 408 stock block engine. Every hemi build I see has been pretty expensive starting with the core costs to get the project moving along but look at the biggest advantage of going to a new hemi John, you get to turn every smallblock thread into a gen 3 thread.

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: Hot 340] #2001643 01/30/16 12:13 AM 01/30/16 12:13 AM
Joined: Feb 2005 Posts: 20,279 PA. pittsburghracer OP "Little"John
pittsburghracer OP "Little"John Joined: Feb 2005 Posts: 20,279 PA.	True. Very true. Lol. Wanted hemi engine for a budget build. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.38@138.67 Livin and lovin life one day at a time

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: pittsburghracer] #2001653 01/30/16 12:23 AM 01/30/16 12:23 AM
Joined: Oct 2003 Posts: 11,704 W. Kentucky justinp61 I Live Here
justinp61 I Live Here Joined: Oct 2003 Posts: 11,704 W. Kentucky	John, what does your car weigh?

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: justinp61] #2001663 01/30/16 12:31 AM 01/30/16 12:31 AM
Joined: Feb 2005 Posts: 20,279 PA. pittsburghracer OP "Little"John
pittsburghracer OP "Little"John Joined: Feb 2005 Posts: 20,279 PA.	[quote=justinp61]John, what does your car weigh? [/quot 2800 with me in the seat and race ready. I weighted 2550 when my son drove it as he is a hair lighter, I removed the fiberglass doors and installed stock doors with working windows, alternator, bigger radiator, racepak dash, wiring and sensors, and a few other items to make it very racer friendly 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.38@138.67 Livin and lovin life one day at a time

Re: with all the BS I'm going for it. Eldebrock Victor head rant [Re: pittsburghracer] #2002113 01/30/16 05:56 PM 01/30/16 05:56 PM
Joined: Jan 2005 Posts: 12,494 Kalispell Mt. H HotRodDave I Live Here
HotRodDave I Live Here H Joined: Jan 2005 Posts: 12,494 Kalispell Mt.	The core cost ain't bad around here, $500 gets a good early 5.7, and parts availability is not bad, eagle or even apache heads are way cheaper than edelbrock SB heads... if your willing to spend $1000 on an intake, $1000 on headers, $2000 on EFI or IGN/harness/carb, $500 for an oil pan, got to get a new flywheel/flexplate, none of you SB accessories bolt on, the stroker kits are about $500 more and so on and so on... I am not causing global warming, I am just trying to hold off a impending Ice Age!

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1