Indy block
#1839732
06/02/15 02:18 PM
06/02/15 02:18 PM
|
Joined: Sep 2003
Posts: 1,049 San Jose Ca.
boatracer572
OP
super stock
|
OP
super stock
Joined: Sep 2003
Posts: 1,049
San Jose Ca.
|
Just wanted to post an informational about my new Indy block, I don't want it to turn into a Indy bash thred. I bought a new Indy block from a member here that lived close to me. The block was new and semi machined with lifter bushings installed. After mock up I took it to my machinest and was told the decks were "S" shaped and were .007" out from front to back, the line hone was.002" out, the oil galleys for pushrods oil were to low to pick up oil, the thrust bearing wouldn't even fit in the block due to the block being miss machined . I had my guy fix all the problems. After assembly and start up I found that the block is filling the water jacket with motor oil now, so it's back to the machine shop to have a sleeve installed in the oil gally now.... After talking to a well known mopar engine builder he had told me that he has heard of that happening at other shops and has seen it twice in his shop..... I just wanted to give you guys a buyer be ware of the junk most know about that leaves Indys place, I havent , and won't contact Indy about my block due to it will be a waste of my time....give ken black a call and wait it out... Thanks for listing Tony
Last edited by boatracer572; 06/02/15 04:38 PM.
|
|
|
Re: Indy block
[Re: boatracer572]
#1839750
06/02/15 02:37 PM
06/02/15 02:37 PM
|
Joined: Jun 2007
Posts: 2,432 NorCal
RylisPro
top fuel
|
top fuel
Joined: Jun 2007
Posts: 2,432
NorCal
|
What the Hell? That was my block! Damn that really sucks! Is the block even usable? Not good news at all! ![]( http://www.velocidadmaxima.com/forum/images/smilies/no.gif)
|
|
|
Re: Indy block
[Re: boatracer572]
#1839778
06/02/15 03:26 PM
06/02/15 03:26 PM
|
Joined: Aug 2006
Posts: 290 Cincinnati, Ohio
d7cook
enthusiast
|
enthusiast
Joined: Aug 2006
Posts: 290
Cincinnati, Ohio
|
....give ken black a call and wait it out... Thanks for listing Tony Definitely wait it out. I ordered last November. Deposit paid and nothing but crickets ever since.
1967 Coronet, 1989 Daytona tube chassis.
Former cars, 66 Charger, 67 R/T, 69 Coronet, 67 Dart GT.
-Banned for life from V8Buick.com-
|
|
|
Re: Indy block
[Re: boatracer572]
#1839822
06/02/15 04:07 PM
06/02/15 04:07 PM
|
Joined: Jul 2010
Posts: 2,422 Pittsburgh PA
Eric
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,422
Pittsburgh PA
|
Looks like I'll be looking for another 400 factory block to blow up...lol
5.53 @ 125 1/8th on the launch control..more left in her!
|
|
|
Re: Indy block
[Re: Eric]
#1839856
06/02/15 04:54 PM
06/02/15 04:54 PM
|
Joined: Nov 2009
Posts: 3,410 Belpre,Ohio
CHAPPER
master
|
master
Joined: Nov 2009
Posts: 3,410
Belpre,Ohio
|
Looks like I'll be looking for another 400 factory block to blow up...lol I know the feeling,,,,,
If you like drag racing, support your local track.
|
|
|
Re: Indy block
[Re: boatracer572]
#1839872
06/02/15 05:26 PM
06/02/15 05:26 PM
|
Joined: Sep 2003
Posts: 1,049 San Jose Ca.
boatracer572
OP
super stock
|
OP
super stock
Joined: Sep 2003
Posts: 1,049
San Jose Ca.
|
Mine is in the priority oil gally , install a head or use a deck plate, pressurize the water jacket ( plate on water pump holes with gauge )use soap suds to see if you have any leaks
Last edited by boatracer572; 06/02/15 05:31 PM.
|
|
|
Re: Indy block
[Re: boatracer572]
#1839882
06/02/15 05:43 PM
06/02/15 05:43 PM
|
Joined: Jan 2012
Posts: 2,687 Stuttgart, Arkansas
rickseeman
master
|
master
Joined: Jan 2012
Posts: 2,687
Stuttgart, Arkansas
|
Just wanted to post an informational about my new Indy block, I don't want it to turn into a Indy bash thred. Tony What's wrong with turning this into a bash Indy thread? Is that against the rules? I don't want to break the rules but we have so much material to work with.
2011 Drag Pak Challenger
|
|
|
Re: Indy block
[Re: d7cook]
#1839890
06/02/15 05:58 PM
06/02/15 05:58 PM
|
Joined: Feb 2005
Posts: 20,203 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,203
PA.
|
....give ken black a call and wait it out... Thanks for listing Tony Definitely wait it out. I ordered last November. Deposit paid and nothing but crickets ever since. I gave a heads-up last year saying its time to order if you want a Keith Black block for the 2015 race season but guys laughed it off. Its not like you have to pay in full when you order and EVERY block is custom made to your specs and well worth the wait.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Indy block
[Re: boatracer572]
#1839892
06/02/15 06:03 PM
06/02/15 06:03 PM
|
Joined: Jan 2012
Posts: 2,687 Stuttgart, Arkansas
rickseeman
master
|
master
Joined: Jan 2012
Posts: 2,687
Stuttgart, Arkansas
|
I don't know about other people's experiences but every time I deal with Indy, at the end of the day I feel like I have been sexually assaulted.
2011 Drag Pak Challenger
|
|
|
|
|