I remember a saw a post where disc brakes can be installed in the rear using new parts such as
Cherokee rotors and small GM caliper or something like that to have an affordable set up.....

Can't retrace the informations....
Can somebody help ?

Thanks
Dan

https://www.quickperformance.com/mobile/Weld-On-Disc-Brake-Kit_p_16007.html3

Or

93 Jeep cherokee front rotors
GM metric calipers
weld on brackets available from Speedway motors

Speedway Motors weld on brackets, the rotors I used were 2000 Grand Cherokee fronts, and GM metric calipers from I believe mid-80's G body. Whole thing cost me a total of about $150 using all new parts and hardware. Works great!

Randy

Great ! can someone give me a precise application for the rotors ?
Guys at the counter are diffucult to work with sometimes.....

Dan

Also, what type of master cylinder should I use ?
For 67 Barracuda

I used 95 jeep grand Cherokee for the rotors 88 bucks for the pair. 92 s10 caliper 11 bucks each and bracket from jegs. Was like 12-15 bucks

93 Cherokee rotors will get you what you need, that same rotor is used in a lot of Jeep applications so I'm sure other years/models will work as well.
A 93 Dakota master cylinder will work well

Do you need a shorter-longer pushrod for the Dakota Master cyl ?

Adjustable pushrod and 4 to 2 bolt adapter will make the install easy

do you install the caliper at the front of wheel or behind....

Someone has pics ?
Thanks

Not sure if it really makes a difference, but mine are installed with caliper rearward. Also, you may want to install an adjustable proportioning valve between the master cylinder and the rear line to adjust front/rear bias.

Randy

Another thing worth mentioning, my rotors had to be machined slightly to seat completely over the flanges on my axles. Not much, and may have been the cheap rotors I bought. When I installed mine I put an air fitting in the caliper and bolted the caliper to the bracket. Tightened the lug nuts on the rotor and slid the caliper with pads and bracket over the rotor and placed them where I wanted them. Put an air hose to the caliper to "clamp" it to the rotor and tack it up!

Randy

Install a 92 Dakota MC..
What if I keep the stock disc master cylinder ?
Thanks

Can someone post the exact brackets needed? Speedway has alot of choices

Part # 91641009

I just bought from
Allstar performance no. 42102

Dan

rear disc on 8 3/4

http://www.forabodiesonly.com/mopar/showthread.php?t=128394

Can I keep the stock MC ?

I was looking at the 1993 Jeep rotors and they appear to be close to 11" diameter and the brackets seem to be designed for the larger 11-3/4" rotors. Do the brackets need to be re-radiused to move the calipers closer to the axle centerline by 3/8"?