Previous Thread
Next Thread
Print Thread
Page 2 of 3 1 2 3
Re: Drag race trucks [Re: W.I.N. Racing] #1713087
12/22/14 12:06 AM
12/22/14 12:06 AM
Joined: Dec 2008
Posts: 1,285
okla.
sam64 Offline
pro stock
sam64  Offline
pro stock

Joined: Dec 2008
Posts: 1,285
okla.
My 67 swb,440 stealth heads mp .528 cam,powerglide,4.10 8.8 ford rearend.runs 7.30s@94mph in the1/8.9x29.5x15 m/t slicks

8369944-image.jpg (696 downloads)
Re: Drag race trucks [Re: dd340] #1713088
12/22/14 12:09 AM
12/22/14 12:09 AM
Joined: Jun 2005
Posts: 142
Chattanooga, TN
KDY Offline
member
KDY  Offline
member

Joined: Jun 2005
Posts: 142
Chattanooga, TN
Quote:

What are you doing for suspension and tires to get that truck hooked up? My d100 will hit 86mph in the 1/8th mile but I have absolutely no traction.




The rear is is flipped up on top of the springs. 28.5x9 pheonix slicks. That's it.

It needs better shocks front and rear to be honest. Me and the buddy that helped me put it together are completely shocked at how it hooks so good.

8369947-image.jpg (451 downloads)
Last edited by KDY; 12/22/14 12:10 AM.
Re: Drag race trucks [Re: hp340nos] #1713089
12/22/14 12:30 AM
12/22/14 12:30 AM
Joined: Jun 2005
Posts: 142
Chattanooga, TN
KDY Offline
member
KDY  Offline
member

Joined: Jun 2005
Posts: 142
Chattanooga, TN
Quote:

my 88 dakota street/strip,pump gas 340 stroker,727,8 3/4.m/t drag radial.has been [Email]7.30@95[/Email] on motor and [Email]6.84@102[/Email] on 100 shot,raced as driven on the street and 45 minutes to the track.




Very impressive. I've always thought a Dakota would make a good drag truck. Any more info on the engine? What's it weigh?

Re: Drag race trucks [Re: KDY] #1713090
12/22/14 01:10 AM
12/22/14 01:10 AM
Joined: Jan 2003
Posts: 1,365
elmira ny
hp340nos Offline
pro stock
hp340nos  Offline
pro stock

Joined: Jan 2003
Posts: 1,365
elmira ny
my dakota is 3360# with me and full cell of gas, motor is 340 .040 over 4" cast crank, 9.8 compression,diamond dish pistons,scat i beam rods,cast iron x-heads fully ported ,custom crane cams solid roller cam with morel lifters.weiand intake,aed 850 db carb.freshened 727 tranny with lba, reverse, manual valve body,10"t/a converter reworked by ptc.67 b-body 8 3/4 rear with 3.91 gears.m/t drag radials 295 55 15.

8370015-001.JPG (300 downloads)
Re: Drag race trucks [Re: hp340nos] #1713091
12/22/14 02:53 AM
12/22/14 02:53 AM
Joined: Apr 2005
Posts: 673
Emmett, Idaho
S
SuperStockWagon Offline
mopar
SuperStockWagon  Offline
mopar
S

Joined: Apr 2005
Posts: 673
Emmett, Idaho
Here is a shot of my sons D50..runs 10.6's@7500ft DA with a pump gas 408/PG/8 3/4. Very consistant and easy on parts.


NHRA Stock/SuperStock Class Racing..Engineered Muscle In Motion!
Re: Drag race trucks [Re: SuperStockWagon] #1713092
12/22/14 10:12 AM
12/22/14 10:12 AM
Joined: Jan 2003
Posts: 520
,Pa.
68dodge Offline
mopar
68dodge  Offline
mopar

Joined: Jan 2003
Posts: 520
,Pa.
Here my 76 still in the building process. Mini tubbed, 8 3/4 rear, 8 pt cage, fuel cell, 29x15x12.50 goodyear slicks

8370133-t29.JPG (622 downloads)
Last edited by 68dodge; 12/22/14 10:14 AM.
Re: Drag race trucks [Re: 68dodge] #1713093
12/22/14 10:16 AM
12/22/14 10:16 AM
Joined: Jan 2003
Posts: 520
,Pa.
68dodge Offline
mopar
68dodge  Offline
mopar

Joined: Jan 2003
Posts: 520
,Pa.
Quote:

Here my 76 still in the building process. Mini tubbed, 8 3/4 rear, 8 pt cage, fuel cell, 29x15x12.50 goodyear slicks



another picture

8370136-t36.JPG (512 downloads)
Re: Drag race trucks [Re: sam64] #1713094
12/22/14 12:58 PM
12/22/14 12:58 PM
Joined: Dec 2006
Posts: 2,141
Byron, NY
W.I.N. Racing Offline
top fuel
W.I.N. Racing  Offline
top fuel

Joined: Dec 2006
Posts: 2,141
Byron, NY
Quote:

My 67 swb,440 stealth heads mp .528 cam,powerglide,4.10 8.8 ford rearend.runs [Email]7.30s@94mph[/Email] in the1/8.9x29.5x15 m/t slicks




Very Nice... Wish you were closer, it would be great to have you race in our Gasser series!


'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60
'01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust,
'05 Dodge Magnum R/T - Too Much to list
'60 Willys CJ5
'01 International LPX - Project,DT466, Allison
'64 Plymouth Valiant, Inj 528 Hemi, 2spd
Re: Drag race trucks [Re: W.I.N. Racing] #1713095
12/23/14 07:51 PM
12/23/14 07:51 PM
Joined: Apr 2012
Posts: 119
Wyoming
M
mechanic190 Offline OP
member
mechanic190  Offline OP
member
M

Joined: Apr 2012
Posts: 119
Wyoming
Great pick ups! Anybody else? Anybody start slow with an almost stock pick up? What did you do that helped the most as far as chassis wise? Weight reduction?

Re: Drag race trucks [Re: mechanic190] #1713096
12/24/14 12:18 PM
12/24/14 12:18 PM
Joined: Dec 2009
Posts: 21,208
in a cattle trailer down by th...
G
Guitar Jones Offline
Paddle faster! I hear banjo music!
Guitar Jones  Offline
Paddle faster! I hear banjo music!
G

Joined: Dec 2009
Posts: 21,208
in a cattle trailer down by th...
My buddies 3.9 V6 stocker. It's been high 13's. He has since sold it.



"Come get your wife"


'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion.
'74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Front and rear disc and hydroboost conversion.
2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
Re: Drag race trucks [Re: Guitar Jones] #1713097
12/24/14 06:02 PM
12/24/14 06:02 PM
Joined: Apr 2005
Posts: 673
Emmett, Idaho
S
SuperStockWagon Offline
mopar
SuperStockWagon  Offline
mopar
S

Joined: Apr 2005
Posts: 673
Emmett, Idaho
This is one of my favorite Stock Eliminator race trucks! Belongs to Jack Foshee in OK..K/SA that can run an easy second under the index(11.65)..w/360 T-Quad engine and the truck is all steel! Think he has a handle on that suspension!? lol

No question Dodge full size(and Dakotas)are the kings when it comes to trucks in NHRA Stock Eliminator drag racing.

I have one(factory silver 80)that I'm getting ready to start building to run in SS.


NHRA Stock/SuperStock Class Racing..Engineered Muscle In Motion!
Re: Drag race trucks [Re: SuperStockWagon] #1713098
12/24/14 06:52 PM
12/24/14 06:52 PM
Joined: Feb 2011
Posts: 440
Marysville, WA
77ProStreet Offline
mopar
77ProStreet  Offline
mopar

Joined: Feb 2011
Posts: 440
Marysville, WA
Here's my old 77 that was mostly street driven but took to the track a few times. 440, 509 cam, 727, 9" with 4.56 gears, 31x18.50 M/T Pros.
I could never hook up in first gear, but still ran consistent 12.50 1/4 mile.
[image][/image] [image][/image]

Re: Drag race trucks [Re: 77ProStreet] #1713099
12/24/14 08:48 PM
12/24/14 08:48 PM
Joined: Aug 2003
Posts: 5,041
new jersey usa
1
11secdart Offline
master
11secdart  Offline
master
1

Joined: Aug 2003
Posts: 5,041
new jersey usa
Dodge Dakota and full size Stock and S/S Trucks are way cool!!!

8372864-IMG_0270.JPG (522 downloads)
Last edited by 11secdart; 12/24/14 08:55 PM.

68 Dart 410 / 904
92 D150 original owner
21 Ram 1500 Quad Cab, Big Horn , Hemi ,4x4
23 Audi Q5
16 Honda HRV
Re: Drag race trucks [Re: mechanic190] #1918560
09/24/15 12:53 AM
09/24/15 12:53 AM
Joined: Apr 2012
Posts: 119
Wyoming
M
mechanic190 Offline OP
member
mechanic190  Offline OP
member
M

Joined: Apr 2012
Posts: 119
Wyoming
I'd like to bring back my dead thread lol. After getting laid off and moving I now have my race pick up up here with me

Re: Drag race trucks [Re: mechanic190] #1918562
09/24/15 12:57 AM
09/24/15 12:57 AM
Joined: Apr 2012
Posts: 119
Wyoming
M
mechanic190 Offline OP
member
mechanic190  Offline OP
member
M

Joined: Apr 2012
Posts: 119
Wyoming
Let's see if this picture works

image.jpeg
Re: Drag race trucks [Re: mechanic190] #1919094
09/24/15 09:00 PM
09/24/15 09:00 PM
Joined: Oct 2009
Posts: 1,267
North, Alabama
D-50 Offline
pro stock
D-50  Offline
pro stock

Joined: Oct 2009
Posts: 1,267
North, Alabama
Update on my pump gas small block D50. 6.21 @ 110 in the 1/8 a while back. I think it will run some 6.teens in the fall air. I do not know how to post a picture anymore since the change. All motor...

Last edited by D-50; 10/02/15 07:47 PM.

1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
Re: Drag race trucks [Re: mechanic190] #1919837
09/25/15 11:09 PM
09/25/15 11:09 PM
Joined: Apr 2012
Posts: 119
Wyoming
M
mechanic190 Offline OP
member
mechanic190  Offline OP
member
M

Joined: Apr 2012
Posts: 119
Wyoming
Nice job. I'm just hoping for 8 maybe 9 sec 1/8 at this point. My set up is going to consist of a 69 440. .020 bore with what looks like factory 20 over flat top Pistons. 906 heads with no work done to them just valve springs. XE284H comp cam with a tunnel ram. 4.88 gears and 3000 converter

Re: Drag race trucks [Re: mechanic190] #1919840
09/25/15 11:13 PM
09/25/15 11:13 PM
Joined: Apr 2012
Posts: 119
Wyoming
M
mechanic190 Offline OP
member
mechanic190  Offline OP
member
M

Joined: Apr 2012
Posts: 119
Wyoming
Ps I'm taking donations lol

Re: Drag race trucks [Re: mechanic190] #1922509
09/30/15 02:03 PM
09/30/15 02:03 PM
Joined: Jan 2015
Posts: 105
South Florida
indcontrols Offline
member
indcontrols  Offline
member

Joined: Jan 2015
Posts: 105
South Florida
My Dakota, 588" megablock with -1's I'd love to list a time, but first pass out last sunday I exploded the planetaries in the'glide... [url=[URL=http://s1017.photobucket.com/user/indcontrols/media/photo3.jpg.html][/url]][http://i1017.photobucket.com/albums/af297/indcontrols/photo3.jpg[/IMG][/url]
]http://s1017.photobucket.com/user/indcontrols/media/side%20shot%20small.jpg.html]

Re: Drag race trucks [Re: indcontrols] #1924013
10/02/15 09:59 AM
10/02/15 09:59 AM
Joined: Jul 2008
Posts: 198
Gainesville Fl
M
mphsmitch Offline
member
mphsmitch  Offline
member
M

Joined: Jul 2008
Posts: 198
Gainesville Fl
My truck is a 90 Dakota with a magnum based 408 CID engine. It has R/T heads,air gap intake,hyd roller cam,HP 750 carb,727 trans,9.5 4600 converter,8.8 rear,3.73 gears,Pro 275 drag radial. It has run a best of 7.07 @ 95 MPH. 11.24 @ 117 mph on motor.


90 Dakota 408 CID R/T heads 727 trans 9.5 converter 8.8 rear Pro 275/60 drag radials [email]11.09 @120mph[/email] N/A
Page 2 of 3 1 2 3






Powered by UBB.threads™ PHP Forum Software 7.7.1