Trying to mount a high amp quality power billet mopar style alternator on the drivers side with a Meziere block mount electric water pump with a stock timing cover. Do you guys have any photos or ideas, or is there a bracket I can buy?
Thanks in advance.
Macka

Head over to EBAY and look around, a guy from Australia is selling one.

I have looked at his, only dilemma is his attaches to the to outside of the head and my W5's don't have a hole for that provision.

Drill and tap a hole maybe?

I've looked too as I want to move mine to the lower left drivers side as well, but everything I have found is custom one off stuff, no one makes one that I have found except the EBAY seller.

not running a motor plate I'm assuming....

here's a picture of the end of my W5 "pen holder" on my desk... holes are 3/4" deep. appears to be enough meat in that machined area for holes.

No motor plate. The billet bracket sold on eBay from Australia requires a hole just beside the R of the 'MOPAR' on the head and I'm not confident in spot facing then drilling and tapping a hole that close to the edge and so close to the head bolt hole, particularly on a W5 head. I'm thinking maybe modifying a factory triangle plate with a relief to go around the water pump inlet on the drivers side of the timing cover?????