|
Re: Milodon S/S drag link through center oil pan issues
[Re: Leigh]
#1659471
08/16/14 11:51 AM
08/16/14 11:51 AM
|
Joined: Apr 2006
Posts: 729
Lebanon,IN
mr2performance
super stock
|
super stock
Joined: Apr 2006
Posts: 729
Lebanon,IN
|
Send it over. I'll do it. Mike
MR2PERFORMANCE RACE CARS
765 483 9371
|
|
|
Re: Milodon S/S drag link through center oil pan issues
[Re: mr2performance]
#1659472
08/16/14 12:37 PM
08/16/14 12:37 PM
|
Joined: Jan 2003
Posts: 11,718
Portage,michigan
B3422W5
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 11,718
Portage,michigan
|
Thanks for the offer to help  I found a guy here local to do it, who owns a welding business.... Will pick it up today and knock it out Monday All goes well car should be running Tuesday. Norwalk is getting close, need to sort this thing out at the track probably twice before then. I expect some teething problems as a couple of things are probably marginal to support what I hope the car can run( mainly fuel related) won't know till I lean on it.
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8
|
|
|
Re: Milodon S/S drag link through center oil pan issues
[Re: B3422W5]
#1659473
08/18/14 12:33 PM
08/18/14 12:33 PM
|
Joined: Jan 2003
Posts: 11,718
Portage,michigan
B3422W5
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 11,718
Portage,michigan
|
Got the link modified, fits nicely through the hole now.
But I have only about 3/4 or so turning ability turning right as idler arm hits pan. Full range to the right
It is what it is I guess.
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8
|
|
|
Re: Milodon S/S drag link through center oil pan issues
[Re: B3422W5]
#1659475
08/18/14 08:55 PM
08/18/14 08:55 PM
|
Joined: Apr 2007
Posts: 1,390
CA.
RAY1969CARS
pro stock
|
pro stock
Joined: Apr 2007
Posts: 1,390
CA.
|
Quote:
Drag link isn't able to be bolted up on my A body. Put the nut on drivers side on, and the link is about 1.5 inches to high on passengers side from being in place.... Aargg 
No way to turn the drag link down that much.... And thought about cutting it on each end and welding in a straight piece to replace how the factory bar is made ..... But an outstanding welder who could do it doesn't want the liability( understand his point).... So looks like this trick pan is unusable to me for this 318 mighty mite project
Unless somebody here has an idea....
71 Duster with slant 6 K and Shumacher conversion mounts.... Can't imagine it working with V8 K and different mounts either.... But who knows [/quot
Which one do you have the square one or the round one ???
|
|
|
Re: Milodon S/S drag link through center oil pan issues
[Re: B3422W5]
#1659477
08/18/14 09:18 PM
08/18/14 09:18 PM
|
Joined: Apr 2007
Posts: 1,390
CA.
RAY1969CARS
pro stock
|
pro stock
Joined: Apr 2007
Posts: 1,390
CA.
|
|
|
|
Re: Milodon S/S drag link through center oil pan issues
[Re: RAY1969CARS]
#1659478
08/18/14 11:17 PM
08/18/14 11:17 PM
|
Joined: Jan 2003
Posts: 11,718
Portage,michigan
B3422W5
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 11,718
Portage,michigan
|
Yep that's it.
Nice pan, but if using it with stock suspension and store bought headers....... Wear a metal hat to protect pulling your hair out
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8
|
|
|
Re: Milodon S/S drag link through center oil pan issues
[Re: B3422W5]
#1659479
08/19/14 02:54 AM
08/19/14 02:54 AM
|
Joined: Apr 2007
Posts: 1,390
CA.
RAY1969CARS
pro stock
|
pro stock
Joined: Apr 2007
Posts: 1,390
CA.
|
Quote:
Yep that's it.
Nice pan, but if using it with stock suspension and store bought headers....... Wear a metal hat to protect pulling your hair out
|
|
|
Re: Milodon S/S drag link through center oil pan issues
[Re: RAY1969CARS]
#1659480
08/19/14 03:02 AM
08/19/14 03:02 AM
|
Joined: Apr 2007
Posts: 1,390
CA.
RAY1969CARS
pro stock
|
pro stock
Joined: Apr 2007
Posts: 1,390
CA.
|
Quote:
Quote:
Yep that's it.
Nice pan, but if using it with stock suspension and store bought headers....... Wear a metal hat to protect pulling your hair out
Hooker SuperCom's fit pretty nice
|
|
|
|
|
