Painless has a deal for a racer!
#165029
12/09/08 05:45 PM
12/09/08 05:45 PM
|
Joined: Aug 2007
Posts: 2,224 Arlington, Tx.
BJS racing
OP
top fuel
|
OP
top fuel
Joined: Aug 2007
Posts: 2,224
Arlington, Tx.
|
We are just finishing up our 50005 8 circuit race harness. Here's the fun part. Someone will get a free one. But, yes theres a but, we will give you the harness only if it can be installed and give us feed back by christmas. Now most of you guys know me personally or through the board here. If you go to the link below you can see a pic of the set up that you will be getting for your feed back and install feed back on our newest product. I originally designed this set up for guys like us. It is EVERYTHING you need to wire your race car. The only thing you would need to make it a street car would be our 30120 turn signal kit. I have to have someone picked out for this install by thursday. So PM me with your info and I'll let you know all the requirements.
Jason Hamner Painless Performance Tech. Support
Back in the swing of things at Painless again! Great to be back!
|
|
|
Re: Painless has a deal for a racer!
[Re: Blucuda413]
#165031
12/09/08 05:53 PM
12/09/08 05:53 PM
|
Joined: Dec 2007
Posts: 10,542 BROOK PARK, OH
WILD BILL
Senior Member of the Junior Dragster Club
|
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
And my car already has one of your 8 circuit kits ![](/ubbthreads/images/graemlins/rant.gif)
Maybe if I wasn't so sick of working on it from this past season ![](/ubbthreads/images/graemlins/1343795-scratchchin.gif)
|
|
|
Re: Painless has a deal for a racer!
[Re: BJS racing]
#165034
12/09/08 07:03 PM
12/09/08 07:03 PM
|
Joined: Mar 2006
Posts: 9,910 Eighty Four, PA
B G Racing
master
|
master
Joined: Mar 2006
Posts: 9,910
Eighty Four, PA
|
Quote:
Oh and btw this is the only place I posted this up on. It was going to go to one of you guys or noone!
Me,Me Pick Me ![](/ubbthreads/images/graemlins/boogie.gif)
|
|
|
Re: Painless has a deal for a racer!
[Re: B G Racing]
#165035
12/09/08 09:51 PM
12/09/08 09:51 PM
|
Joined: May 2005
Posts: 1,130 Dayton, Ohio
wldtm
super stock
|
super stock
Joined: May 2005
Posts: 1,130
Dayton, Ohio
|
i might have a bracket dakota that needs one in my dads truck. i will ask him. i would have to have it installed by the 24th because we would be living then for my in-laws. we test fitted the musclecar kit on his hemi dart when that kit came out a few years ago.
justin
ps i am still working on coming to texas to see a "real" install
Interested in having you car wired? Drag car, street car, EFI swap?
PM for details
|
|
|
Re: Painless has a deal for a racer!
[Re: B G Racing]
#165036
12/09/08 09:57 PM
12/09/08 09:57 PM
|
Joined: Jan 2003
Posts: 852 Georgetown, TX
sc4579
super stock
|
super stock
Joined: Jan 2003
Posts: 852
Georgetown, TX
|
I already did one of those Jason over a year ago in my other Dart Sport I sold to Jake Pitt. It was an 8 circuit switch panel and 8 switch in dash panel. Turned out real nice and only took me most of a Sunday to do it. Here is a pic of it in the dash, did not take one of the fuse/relay panel under the dash. Kim
2023 Challenger Scat Pack 1320 2016 Jeep Renegade
|
|
|
Re: Painless has a deal for a racer!
[Re: Keith Richards]
#165044
12/11/08 01:03 PM
12/11/08 01:03 PM
|
Joined: Aug 2007
Posts: 2,224 Arlington, Tx.
BJS racing
OP
top fuel
|
OP
top fuel
Joined: Aug 2007
Posts: 2,224
Arlington, Tx.
|
Well everyone, the decision was made (of course after I posted this) that they are not going to do a pre release install. Thanks for all your reply's. Sorry about the outcome. But they will be available for sale in about a week or two through any of our dealers.
Jason
Back in the swing of things at Painless again! Great to be back!
|
|
|
Re: Painless has a deal for a racer!
[Re: BJS racing]
#165045
12/11/08 03:56 PM
12/11/08 03:56 PM
|
Joined: Jan 2003
Posts: 4,421 in a chair
mopartony
master
|
master
Joined: Jan 2003
Posts: 4,421
in a chair
|
Great!! Now I have speghetti on my garage floor!!! ![](/ubbthreads/images/graemlins/rant.gif) Just kidding. Jason thanks for thinking of my on this. I am thinking I will want to try one of these harnesses. We have talked about the issues in the Duster. What does one of these little gems run cost wise?
|
|
|
Re: Painless has a deal for a racer!
[Re: BJS racing]
#165047
12/11/08 04:42 PM
12/11/08 04:42 PM
|
Joined: Jan 2003
Posts: 4,421 in a chair
mopartony
master
|
master
Joined: Jan 2003
Posts: 4,421
in a chair
|
Quote:
Quote:
Great!! Now I have speghetti on my garage floor!!! ![](/ubbthreads/images/graemlins/rant.gif)
Just kidding. Jason thanks for thinking of my on this.
I am thinking I will want to try one of these harnesses. We have talked about the issues in the Duster.
What does one of these little gems run cost wise?
Well its your fault you have spaghetti on your floor. Your a messy eater man! ![](/ubbthreads/images/graemlins/laugh2.gif)
List on the harness is $999.95. So you will more than likely see it at somewhere around $750 through most of the dealers. If you price a switch panel and a 50001 it actually comes out a little cheaper and is set up a little better.
Yeah I guess I should not eat in the garage.
a grand, ouch a little pricey for me. It may have to wait and I will have to dive in and see if there is an issue or if the driver/owner is just parinoid.
|
|
|
Re: Painless has a deal for a racer!
[Re: BJS racing]
#165049
12/11/08 05:05 PM
12/11/08 05:05 PM
|
Joined: Jan 2003
Posts: 4,421 in a chair
mopartony
master
|
master
Joined: Jan 2003
Posts: 4,421
in a chair
|
Quote:
Quote:
Quote:
Quote:
Great!! Now I have speghetti on my garage floor!!! ![](/ubbthreads/images/graemlins/rant.gif)
Just kidding. Jason thanks for thinking of my on this.
I am thinking I will want to try one of these harnesses. We have talked about the issues in the Duster.
What does one of these little gems run cost wise?
Well its your fault you have spaghetti on your floor. Your a messy eater man! ![](/ubbthreads/images/graemlins/laugh2.gif)
List on the harness is $999.95. So you will more than likely see it at somewhere around $750 through most of the dealers. If you price a switch panel and a 50001 it actually comes out a little cheaper and is set up a little better.
Yeah I guess I should not eat in the garage.
a grand, ouch a little pricey for me. It may have to wait and I will have to dive in and see if there is an issue or if the driver/owner is just parinoid.
Man like I said. That is list! I don't know anyone that pays list. That is unless your one of those stubborn bastards that has to get it directly from the manufacturer. Typically the end user will pay Jobber or just a touch over Jober which is where the $750ish price came from. But think about what you spent on what you have there now and you'll notice its not a whole lot more!
True, I just need to go through it and see where the issue is. Call it lazy or just afraid of wiring. I will go with the second. ![](/ubbthreads/images/graemlins/thumbs.gif)
|
|
|
Re: Painless has a deal for a racer!
[Re: BJS racing]
#165051
12/11/08 05:25 PM
12/11/08 05:25 PM
|
Joined: Dec 2008
Posts: 27 texas
yellowsubNSS
member
|
member
Joined: Dec 2008
Posts: 27
texas
|
is this basically what we put in the sub? I like it so far or at least until someone pinches a wire! LOL Are you ever going to come over and get that motor? SW ![](/ubbthreads/images/graemlins/whistling.gif)
Texas Outsiders Nostalgia Super Stocks
|
|
|
Re: Painless has a deal for a racer!
[Re: yellowsubNSS]
#165052
12/11/08 05:29 PM
12/11/08 05:29 PM
|
Joined: Aug 2007
Posts: 2,224 Arlington, Tx.
BJS racing
OP
top fuel
|
OP
top fuel
Joined: Aug 2007
Posts: 2,224
Arlington, Tx.
|
Steve, its a refined version of whats in the sub and it uses a little different style of switch. Yes I actually forgot all about that motor. I thought Mike was going to get it. I'll give you a call and we'll work out the time on when and where I need to get it. Is it still at your dads old house? I need to get that fuel jug and the air gauge as well one of these days.
Back in the swing of things at Painless again! Great to be back!
|
|
|
Re: Painless has a deal for a racer!
[Re: BJS racing]
#165053
12/11/08 05:32 PM
12/11/08 05:32 PM
|
Joined: Dec 2008
Posts: 27 texas
yellowsubNSS
member
|
member
Joined: Dec 2008
Posts: 27
texas
|
yea, its still there. I think the guage and stuff is in the race trailer and I keep it there. Will need to borrow the neighbors tractor to hoist it. Will wait for a decent day not since freezing or azzes over it.
SW
Texas Outsiders Nostalgia Super Stocks
|
|
|
Re: Painless has a deal for a racer!
[Re: BJS racing]
#165055
07/31/09 07:30 PM
07/31/09 07:30 PM
|
Joined: Sep 2007
Posts: 876 Arizona
PolyDart
super stock
|
super stock
Joined: Sep 2007
Posts: 876
Arizona
|
I bought my 50005 several months ago and just got around to installing it. Turned out that the pink and yellow wires were switched around in the factory wired relay/fuse block causing all sorts of problems which were only diagnosed when I pulled the relay/fuse box out and saw the problem right in front of me. Of course when I called tech support they thought it must be a wiring problem on my end when the fuel pump came on with the ignition, and the MSD box would only light up when the fuel pump switch was thrown ![](/ubbthreads/images/graemlins/eeek.gif) Finally got it figured out and fixed. Just wanted to add this to the thread in case someone else stumbles across the same problem. Unfortunately my first experience with Painless wasn't ![](/ubbthreads/images/graemlins/frowwn.gif) Might be a good idea to build a test setup so that the factory wiring can be verified before shipment.
Last edited by ab7fh; 07/31/09 07:31 PM.
|
|
|
|
|