need to see if someone has measurements for where the holes are in the hood for turn indicator & where the wires go

Here are some measurements I took from a 70 D100 Adventurer in a junkyard....I removed the turn signals to install them on my truck, so I took some pictures =so that I could accurately drill my hood
It is 29 1/8 from the center line of the hood to the center of the signal holes

and it is 36 3/4 to the center of the bulb hole from the back edge of the hood

hope this helps !!

the truck I removed the signals from

thanks so much thats what i needed for placement of lamps know just need to know where wires go so it does not look haked.