I want to make my own header collector tethers since I already have the correct clamps. Where can I find those crimp ends with the eyelets?

http://www.ebay.com/itm/1-8-Aluminum-Sle...=item5d49a421af

I'm looking for something like this. Without breaking the bank.
http://www.collectortethers.com/Collector-Tethers-Header-Tether-Universal-End-16150.htm

Hey Sammy - Nice to see you took notice of our products. They swagless eye you are looking at was specially made for us to fit the T-Bolt Clamps properly by a marine company. They are 100% Stainless Steel and have the correct 1/4" diameter eyelet hole and are designed for the 5/32" cable.

All of the features are not available from a production product. Believe me I looked.

Also to I'd like to point out that if you do use tethers to conform to this new rule they must be an NHRA accepted product. All other forms of secondary devices, welding and a hanger type apparatus can be self made.

If you choose a Header Tether we hope you consider Collector Tethers.

Visit us at www.CollectorTethers.com

Thanks,
Scott Lemen

From what i understand is both the cable and the clamps have to have the approved company logo on them to pass inspection.