Gen 3 Hemi Rocker Arms - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Gen 3 Hemi Rocker Arms

Print Thread

Page 2 of 3

1

2

3

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565881 01/22/14 09:49 PM 01/22/14 09:49 PM
Joined: Feb 2011 Posts: 4,302 Nebraska 72Swinger master
72Swinger master Joined: Feb 2011 Posts: 4,302 Nebraska	Im curious what oiling setup will live at 8500+ ? Mopar to the bone!!!

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565882 01/22/14 09:57 PM 01/22/14 09:57 PM
Joined: Nov 2004 Posts: 287 Michigan S SC304 OP enthusiast
SC304 OP enthusiast S Joined: Nov 2004 Posts: 287 Michigan	In case anyone is interested in more class details 9" stock tire 3350 lbs with driver for all 3 of the manufacturers.. No trans brake Ford 9" No electric or air shifter allowed 3 speed transmissions Dave Barton was the king of the hill at Indy this year in the shoot out. If I remember correctly at Z Max they went 8.98 weeks later. Definitely halling the mail. 8008021-image.jpg (458 downloads)

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565883 01/22/14 10:00 PM 01/22/14 10:00 PM
Joined: Oct 2006 Posts: 149 N. Of Detroit, Mi 7 733404spdCuda member
733404spdCuda member 7 Joined: Oct 2006 Posts: 149 N. Of Detroit, Mi	Hmmm giving us a sneak peak of the new car�. I still have 15K for the yellow challenger JB

Re: Gen 3 Hemi Rocker Arms [Re: 72Swinger] #1565884 01/22/14 10:02 PM 01/22/14 10:02 PM
Joined: Nov 2004 Posts: 287 Michigan S SC304 OP enthusiast
SC304 OP enthusiast S Joined: Nov 2004 Posts: 287 Michigan	I run the Melling pump with filter on the block. No remote. All passages massaged. We run jesel lifters so bores are bushed. Oil thru trend pushrods. 6.1 crank treated Have not experienced any oiling issues

Re: Gen 3 Hemi Rocker Arms [Re: 733404spdCuda] #1565885 01/22/14 10:03 PM 01/22/14 10:03 PM
Joined: Nov 2004 Posts: 287 Michigan S SC304 OP enthusiast
SC304 OP enthusiast S Joined: Nov 2004 Posts: 287 Michigan	Funny I don't see a Yellow Challenger. No idea what your talking about.

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565886 01/22/14 10:07 PM 01/22/14 10:07 PM
Joined: Oct 2006 Posts: 149 N. Of Detroit, Mi 7 733404spdCuda member
733404spdCuda member 7 Joined: Oct 2006 Posts: 149 N. Of Detroit, Mi	It must be on the other side of the shop with the �to be restored� cars

Re: Gen 3 Hemi Rocker Arms [Re: 340RICK] #1565887 01/22/14 10:11 PM 01/22/14 10:11 PM
Joined: Nov 2004 Posts: 287 Michigan S SC304 OP enthusiast
SC304 OP enthusiast S Joined: Nov 2004 Posts: 287 Michigan	Adjuster accessibility is real tough. Even on the Jesel. I have experienced some severe melt downs due to improper torquing of adjuster nuts. Resulted in broken rockers and internal devastation as I tell my wife. Lol 8008050-image.jpg (563 downloads)

Re: Gen 3 Hemi Rocker Arms [Re: 733404spdCuda] #1565888 01/22/14 10:15 PM 01/22/14 10:15 PM
Joined: Nov 2004 Posts: 287 Michigan S SC304 OP enthusiast
SC304 OP enthusiast S Joined: Nov 2004 Posts: 287 Michigan	Good eye it's the last one to go. Lora wants it done so she can drive it. Lol If not she says she's driving the red road runner. OH Boy

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565889 01/22/14 10:16 PM 01/22/14 10:16 PM
Joined: Apr 2003 Posts: 3,510 Tulsa, Oklahoma 340Cuda master
340Cuda master Joined: Apr 2003 Posts: 3,510 Tulsa, Oklahoma	Mike, This is a very interesting project please keep us posted on all aspects. Good Luck! Bill Lamb

Re: Gen 3 Hemi Rocker Arms [Re: 340Cuda] #1565890 01/22/14 10:58 PM 01/22/14 10:58 PM
Joined: Jan 2005 Posts: 3,635 Oakland, MI D dizuster master
dizuster master D Joined: Jan 2005 Posts: 3,635 Oakland, MI	I can tell that's an old picture... that black road runner is sitting in front of a 1/2 done primer duster in a different zip code right now...

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565891 01/22/14 11:16 PM 01/22/14 11:16 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Quote: I run the Melling pump with filter on the block. No remote. All passages massaged. We run jesel lifters so bores are bushed. Oil thru trend pushrods. 6.1 crank treated Have not experienced any oiling issues Is your 6.1 a production crank? Matt

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565892 01/22/14 11:26 PM 01/22/14 11:26 PM
Joined: Feb 2011 Posts: 4,302 Nebraska 72Swinger master
72Swinger master Joined: Feb 2011 Posts: 4,302 Nebraska	Quote: Adjuster accessibility is real tough. Even on the Jesel. I have experienced some severe melt downs due to improper torquing of adjuster nuts. Resulted in broken rockers and internal devastation as I tell my wife. Lol maybe give Andy at PWR a call, he would at least know what is possible. Mopar to the bone!!!

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565893 01/23/14 05:10 AM 01/23/14 05:10 AM
Joined: Nov 2008 Posts: 833 MN hemidup super stock
hemidup super stock Joined: Nov 2008 Posts: 833 MN	I was on the horn last week with the HS engineer. We were talking about the oiling problems with their hyd non adjustable lifters and then the discussion turned into their adj rockers using a solid cam. They said they haven't had any issues so far. I'm sure Barton would know for a fact. Jerry Williams.

Re: Gen 3 Hemi Rocker Arms [Re: hemidup] #1565894 01/23/14 02:07 PM 01/23/14 02:07 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	HS rockers in action. I don't like the looks of the oil pouring out the sides https://www.facebook.com/photo.php?v=413...e=2&theater Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: Gen 3 Hemi Rocker Arms [Re: sixpackgut] #1565895 01/23/14 05:45 PM 01/23/14 05:45 PM
Joined: Apr 2005 Posts: 1,505 TN S SCATPACK 1 pro stock
SCATPACK 1 pro stock S Joined: Apr 2005 Posts: 1,505 TN	Wow that is a lot of oil leakage on the exhaust side rockers. Old Geezer Racing

Re: Gen 3 Hemi Rocker Arms [Re: sixpackgut] #1565896 01/23/14 06:53 PM 01/23/14 06:53 PM
Joined: Feb 2011 Posts: 4,302 Nebraska 72Swinger master
72Swinger master Joined: Feb 2011 Posts: 4,302 Nebraska	Quote: HS rockers in action. I don't like the looks of the oil pouring out the sides https://www.facebook.com/photo.php?v=413...e=2&theater Yeah i dont either, but it almost looks like pushrod oiling and it was coming from the cups to me?? Last edited by 72Swinger; 01/23/14 09:37 PM. Mopar to the bone!!!

Re: Gen 3 Hemi Rocker Arms [Re: MattW] #1565897 01/23/14 07:13 PM 01/23/14 07:13 PM
Joined: Nov 2004 Posts: 287 Michigan S SC304 OP enthusiast
SC304 OP enthusiast S Joined: Nov 2004 Posts: 287 Michigan	Yes it is

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565898 01/23/14 09:40 PM 01/23/14 09:40 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Quote: Yes it is So much for turning stock crank above 7000 rpm bullsh1t. BTW thank for sharing info. I do believe this is the way for the G3 to excel. Matt Last edited by MattW; 01/23/14 09:43 PM.

Re: Gen 3 Hemi Rocker Arms [Re: MattW] #1565899 01/24/14 12:45 AM 01/24/14 12:45 AM
Joined: Nov 2004 Posts: 287 Michigan S SC304 OP enthusiast
SC304 OP enthusiast S Joined: Nov 2004 Posts: 287 Michigan	The 6.1 crank has been just fine. At the time it's all that was available The 426 is a Callie's piece cause it is a 4" stroke. Molnar is supplying my new cranks for the next 6.1 builds. Going back to dyno next week with some stiffer rocker shafts. Mike

Re: Gen 3 Hemi Rocker Arms [Re: SC304] #1565900 01/24/14 01:38 AM 01/24/14 01:38 AM
Joined: May 2010 Posts: 207 warren, mich. D dwayne welder enthusiast
dwayne welder enthusiast D Joined: May 2010 Posts: 207 warren, mich.	Hello Who's dyno due you use?? Thanks

Page 2 of 3

1

2

3

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1