twin scoop hood holes - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum twin scoop hood holes

Print Thread

twin scoop hood holes #1497067 09/06/13 11:40 AM 09/06/13 11:40 AM
Joined: Jan 2003 Posts: 5,949 British Columbia C chrisf OP master
chrisf OP master C Joined: Jan 2003 Posts: 5,949 British Columbia	71 demon twin scoop hood. are the fresh air holes 4.250 or 4.500?

Re: twin scoop hood holes [Re: chrisf] #1497068 09/06/13 11:48 AM 09/06/13 11:48 AM
Joined: Jan 2003 Posts: 6,224 JERSEY RJS master
RJS master Joined: Jan 2003 Posts: 6,224 JERSEY	You should go to the FABO board, this has been discussed and there is a guy selling templates to open the hoods up and mount the scoops. He says the measurement is 4" 1/8.

Re: twin scoop hood holes [Re: RJS] #1497069 09/06/13 02:39 PM 09/06/13 02:39 PM
Joined: Jan 2003 Posts: 5,669 South Dakota hotairballoonpilot master
hotairballoonpilot master Joined: Jan 2003 Posts: 5,669 South Dakota	Quote: You should go to the FABO board, this has been discussed and there is a guy selling templates to open the hoods up and mount the scoops. He says the measurement is 4" 1/8. I agree this is the size I was told years ago when I did a 70 swinger. He wasn't wanting the gaskets on them so we just cut them I just used a 4" hole saw centered it in the notched area on the underside of the hood. Contact Me about AMD Prices

Re: twin scoop hood holes [Re: hotairballoonpilot] #1497070 09/06/13 02:46 PM 09/06/13 02:46 PM
Joined: Sep 2004 Posts: 6,906 IL, Aurora A ademon master
ademon master A Joined: Sep 2004 Posts: 6,906 IL, Aurora	Mine measure 4.190" or 4 3/16" . Original J54 car with the original hood.

Re: twin scoop hood holes [Re: ademon] #1497071 09/06/13 03:54 PM 09/06/13 03:54 PM
Joined: Jan 2003 Posts: 5,949 British Columbia C chrisf OP master
chrisf OP master C Joined: Jan 2003 Posts: 5,949 British Columbia	thanks guys. glad I didn't break out the 4 1/2" hole saw.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1