Just upgraded to 13" discs on the front of my Challenger. Did not think in my planning to include a 17" spare. My old 14" rallye spare that I had been using will work for the back, but not the front. What is everybody using? I would prefer to have a spare and not have to rely on AAA. Thanks in advance!!

Not a 17", but might give you the clearance you're needing.
https://board.moparts.org/ubbthreads/show...&PHPSESSID=

Just got that exact setup after he did the write-up. The rim is available new from a few places on eBay, and the tire is easily found at most JYs.

It fits over Viper calipers on the A-body drum brake spindle with Andys (www.arengineering.com) conversion brackets - but of course, they're still only 11.75" rotors. Quite a bit of clearance with that offset, though, so would probably work with 13 inchers, depending on calipers...

look for late model crown vic or mustang donuts...also, look at LX donuts, they'll be a 17" min, and they're taller. granted, they're 5x115mm bolt pattern (5x4.5" is 114.3mm), but for a spare, it's close enough to where it will work to get you where you need to go.

check out pacificas, to...can't remember if they're 5x4.5 or 5x115mm