Holley Terminator EFI? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Holley Terminator EFI?

Print Thread

Holley Terminator EFI? #1467977 07/15/13 12:27 AM 07/15/13 12:27 AM
Joined: Jan 2003 Posts: 2,023 Lincoln NE 4 440forPOWER OP super gas
440forPOWER OP super gas 4 Joined: Jan 2003 Posts: 2,023 Lincoln NE	Hello, looking at putting EFI on the 470 street car. I was just curious if anyone has any experience with the Holley Terminator kit? Was also looking at the new Fast EZ 2.0. Anyone running either system please give your feedback. Thanks

Re: Holley Terminator EFI? [Re: 440forPOWER] #1467978 07/15/13 05:11 PM 07/15/13 05:11 PM
Joined: Jan 2003 Posts: 1,883 Northern OH R rapom top fuel
rapom top fuel R Joined: Jan 2003 Posts: 1,883 Northern OH	On the 2nd page of this post https://board.moparts.org/ubbthreads/show...e=7#Post7736745 There is a guy won a Holley Terminator and installed it during the Hot Rod power tour.

Re: Holley Terminator EFI? [Re: 440forPOWER] #1467979 07/20/13 08:30 PM 07/20/13 08:30 PM
Joined: Jan 2003 Posts: 1,938 Sonora CA Mopar_Rich top fuel
Mopar_Rich top fuel Joined: Jan 2003 Posts: 1,938 Sonora CA	I tested the EZ-EFI 2.0 on the engine dyno on a 383 Chebbie and a 500 Mopar. Both ran great. But you need at least 9" of idle vacuum for the idle learning to work correctly.

Re: Holley Terminator EFI? [Re: 440forPOWER] #1467980 07/29/13 11:20 AM 07/29/13 11:20 AM
Joined: May 2004 Posts: 144 Blair, NE cudacam member
cudacam member Joined: May 2004 Posts: 144 Blair, NE	I just finished up a EZ 2.0 install on my small block stroker this weekend. Went together really well and is a big improvement in driveability over the 750 dp I had on there before. The handheld unit is really nice too. Bought mine from Mopar Rich. 7794186-ez20.JPG (314 downloads)

Re: Holley Terminator EFI? [Re: Mopar_Rich] #1467981 07/29/13 01:29 PM 07/29/13 01:29 PM
Joined: May 2004 Posts: 12,387 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,387 Taxes & Virus's R-US, NY	Quote: you need at least 9" of idle vacuum for the idle learning to work correctly. This seems to be common on some of the learning efi systems. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1