I posted this earlier and got a lot of responses but they are incorrect. This is not a standard Mopar electronic distributor, it is a Mopar racing distributor with tach drive, and the cap is different and so is the rotor button. Mopar is not making these anymore. The part #as of 2001 was P4120886 for dist. #P4120701 The reluctor and other features are different on this dist. I was hoping someone could help me. This cap also had a gasket under it to keep moisture out. I am sure some of you have seen them. Thanks

i have 4 of those distributors...

and as said in your earlier post..

Accel 8330

and bought them from autozone...for a 440 6 pac for dual points..

pretty simple..

Accel makes cap and rotor. Cap is #120323 and rotor is #130316. Also available in cap/rotor package #8330. Fits big and small block tach drive distributors.
Tom

http://www.autozone.com/autozone/parts/D...03_27384_17311_


http://www.autozone.com/autozone/parts/D...153_27384_2708_

bought two each of those a couple of weeks ago..

fyi there is only 1 cap and 1 rotor for any DC/MP MECHANICAL ADVANCE distributor, electronic or points,and the factory cast iron dual points...all use the same cap and rotor. i have sold at least 50 sets and use the cap and rotor on my DC cast iron,mechanical advance,TACH DRIVE,electronic distributor in my own car.

MANCINI SAYS

http://chucker54.stores.yahoo.net/mredupotadrc.html

I have the same distributor. An older Direct Connection electronic, mechanical advance, tach drive distributor. I use the same cap and rotor as for my 1970 440 six pack dual point distributor. Got it from O'Reilly.

Thanks to those who answered. I'm picking one up tomorrow.

I've always call them the Hemi cap and rotor or the Max Wedge racing cap and rotor As already listed, the Accel part numbers sound correct