I need to find the correct yoke for the Dana 60 in my Cuda fast. Found out it came with a 1350 yoke and that is too big. I have some 1330's and they are too small.

They caps are 1.126 OD. Looking for a Spice part number so I can get one in a hurry. Or a source to get one from.

I think it is a Spice 2-4-7901-1 , just want to make sure

It looks like that's what you need.

A Dana 60 yoke for 7290 U-Joints.

http://www.northerndrivetrain.com/product/SPI-2-4-7901-1.html

http://www.summitracing.com/parts/yga-41032?seid=srese1&gclid=CNX_5MSXubcCFYkWMgodLEoAtg



Just make sure that the pinion gear you have has is the 29 spline one.

I have been doing some more research and found that the spicer part I listed is atcually for the 8-3/4 rear end. Have to be careful because both the 8-3/4 and Dana 60 are 29 spline and just about exactly the same size. The link for Summit you posted is correct the one for Northen is not.

I ended up ording one from Randys because they had it in stock and can ship it today yet.

The one from Summit was from a google search for "yoke for dana 60 with 7290 u joint".

The other was a search for the "Spicer 2-4-7901-1" part you had posted.

I didn't catch that it was for an 8-3/4.

It wasn't their smartest idea to use 29 spline in both the Dana 60 and the 8-3/4.
The diameter is close but not the same so they don't interchange.