|
Re: W9 headbolts
[Re: DakFink]
#1363621
01/04/13 11:46 AM
01/04/13 11:46 AM
|
Joined: Jun 2010
Posts: 85 europe
WBR
OP
member
|
OP
member
Joined: Jun 2010
Posts: 85
europe
|
Thanks everyone! I don't have the heads yet, and thought i'd get as much stuff ready as possible when i get them, but wasn't that easy! Lets see what happens when i start looking for headgaskets... Allready know intake gaskets have to be made... Headers i'm doing my self and gaskets to those too.
Street driven, 421 Sb, NA, 9.98/137
|
|
|
Re: W9 headbolts
[Re: 1967dartgt]
#1363626
01/04/13 09:41 PM
01/04/13 09:41 PM
|
Joined: Nov 2009
Posts: 3,082 St. Paul , Mn.
tubtar
master
|
master
Joined: Nov 2009
Posts: 3,082
St. Paul , Mn.
|
SCE has intake and exhaust ( fiber ) gaskets available. I think I have a set of .045 intake gaskets laying around that haven't been cut up , but mine required some trimming to match the port shape I wound up with. I went with Cometic MLS for the head gasket.
Ooops....I just checked SCE's web site. No intake gaskets. Here are MoPar #'s P5007153 Intake Manifold Gasket Set — 0.030" Thick (Small Block W9 Heads) $ 15.95 P5007154 Intake Manifold Gasket Set — 0.045" Thick (Small Block W9 Heads) $ 14.95
P5007155 Intake Manifold Gasket Set — 0.060" Thick (Small Block W9 Heads) $ 16.95
Cut and pasted from Jim's site
Last edited by tubtar; 01/04/13 09:50 PM.
|
|
|
|
|
|