64 spindle help needed - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 64 spindle help needed

Print Thread

64 spindle help needed #1341267 11/25/12 08:05 PM 11/25/12 08:05 PM
Joined: Aug 2003 Posts: 8,716 Baltimore/Denver 64Post OP master
64Post OP master Joined: Aug 2003 Posts: 8,716 Baltimore/Denver	Anybody have a pic of a loose spindle/casting number or pic front suspension? It looks to me like the lower ball joint stud is not lining up with the scalloped area on the back of the knuckle. When the suspension is at full lower travel the knuckle hits the bj stud. Same problem on both sides. Ball joints came from PST and are listed for 64 Dodge. Parts book lists the knuckle as the same; no difference L to R. So they should be interchangeable on both sides. The castings do look different, though.

Re: 64 spindle help needed [Re: 64Post] #1341268 11/25/12 08:58 PM 11/25/12 08:58 PM
Joined: Feb 2007 Posts: 612 Nampa, ID None2Slow mopar
None2Slow mopar Joined: Feb 2007 Posts: 612 Nampa, ID	what are you working on? 64 what? Maybe switch sides and see if it still hits.

Re: 64 spindle help needed [Re: None2Slow] #1341269 11/25/12 09:16 PM 11/25/12 09:16 PM
Joined: Jun 2004 Posts: 893 Tustin, CA P pishta super stock
pishta super stock P Joined: Jun 2004 Posts: 893 Tustin, CA	This help? 67 brakes on a 65 A pass right side

Re: 64 spindle help needed [Re: None2Slow] #1341270 11/25/12 09:19 PM 11/25/12 09:19 PM
Joined: Aug 2003 Posts: 8,716 Baltimore/Denver 64Post OP master
64Post OP master Joined: Aug 2003 Posts: 8,716 Baltimore/Denver	B body... I'd really like to know if the knuckles are correct before I spend more time on this... Switching sides may look OK but still be the wrong parts.

Re: 64 spindle help needed [Re: 64Post] #1341271 11/25/12 09:23 PM 11/25/12 09:23 PM
Joined: Jun 2004 Posts: 893 Tustin, CA P pishta super stock
pishta super stock P Joined: Jun 2004 Posts: 893 Tustin, CA	Glad I could help.....B body....now you tell us! ;-)

Re: 64 spindle help needed [Re: pishta] #1341272 11/25/12 09:41 PM 11/25/12 09:41 PM
A Anonymous Unregistered
Anonymous Unregistered A	Would a '63 drum spindle pic be of any use to you?

Re: 64 spindle help needed [Re: pishta] #1341273 11/25/12 09:53 PM 11/25/12 09:53 PM
Joined: Aug 2003 Posts: 8,716 Baltimore/Denver 64Post OP master
64Post OP master Joined: Aug 2003 Posts: 8,716 Baltimore/Denver	Quote: Glad I could help.....B body....now you tell us! ;-) I've been here almost 10 years. Anybody that knows me knows that there is no car other than a B body in '64. Thank you for the effort, though. Merry X-Mas. Last edited by 64Post; 11/25/12 10:01 PM.

Re: 64 spindle help needed #1341274 11/25/12 09:58 PM 11/25/12 09:58 PM
Joined: Aug 2003 Posts: 8,716 Baltimore/Denver 64Post OP master
64Post OP master Joined: Aug 2003 Posts: 8,716 Baltimore/Denver	Quote: Would a '63 drum spindle pic be of any use to you? Yes. L and R pics would be a plus. I'm working with '64 drum spindles. They should be the same, "Stephan."

Re: 64 spindle help needed [Re: 64Post] #1341275 11/25/12 10:21 PM 11/25/12 10:21 PM
A Anonymous Unregistered
Anonymous Unregistered A	Quote: Quote: Would a '63 drum spindle pic be of any use to you? Yes. L and R pics would be a plus. I'm working with '64 drum spindles. They should be the same, "Stephan." My collectibles shop keeps me busy so you may have to wait a few minutes...

Re: 64 spindle help needed #1341276 11/25/12 10:32 PM 11/25/12 10:32 PM
A Anonymous Unregistered
Anonymous Unregistered A	Okay, I went out and crawled around on the floor. Hope you're happy! Passenger spindle 7476623-PassengerSpilndle.JPG (48 downloads)

Re: 64 spindle help needed #1341277 11/25/12 10:33 PM 11/25/12 10:33 PM
A Anonymous Unregistered
Anonymous Unregistered A	Drivers spindle 7476624-Driversspindle.JPG (46 downloads)

Re: 64 spindle help needed #1341278 11/25/12 11:48 PM 11/25/12 11:48 PM
Joined: Aug 2003 Posts: 8,716 Baltimore/Denver 64Post OP master
64Post OP master Joined: Aug 2003 Posts: 8,716 Baltimore/Denver	Quote: Okay, I went out and crawled around on the floor. Hope you're happy! Yes, thanks. I just didn't trust what I was seeing. Hopefully you didn't get your wittle hands and knees dirty crawling under that hideous 63 Dodge. Then again, I'm pretty sure your used to having dirty knees...

Re: 64 spindle help needed [Re: 64Post] #1341279 11/26/12 12:07 AM 11/26/12 12:07 AM
A Anonymous Unregistered
Anonymous Unregistered A	Quote: Quote: Okay, I went out and crawled around on the floor. Hope you're happy! Then again, I'm pretty sure your used to having dirty knees... Only because your mom likes 'em that way! LOL!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1