Re: I need a soldering iron recommendation...
[Re: Quicksilver440]
#1341113
11/25/12 05:13 PM
11/25/12 05:13 PM
|
Joined: Jan 2004
Posts: 27,347 Today? Who Knows?
1_WILD_RT
Management Trainee
|
Management Trainee
Joined: Jan 2004
Posts: 27,347
Today? Who Knows?
|
Multiple splices of 10-18 ga wire.... For that sort of soldering I leave the soldering iron on the bench & grab my micro-torch... You need allot more heat than you'll get out of a soldering iron... For normal soldering I use my Weller workstation... Cleaning & tinning the tip regularly helps allot..
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."
|
|
|
Re: I need a soldering iron recommendation...
[Re: Quicksilver440]
#1341114
11/25/12 05:18 PM
11/25/12 05:18 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
I just went thru this. I'd recommend finding a very large soldering iron (not a gun) or a small butane torch. The trick for me was to solder with NO wind and clean & tin the tip requently & use small clip on heat sinks that look sorta like nail clippers on either side to keep the heat from traveling & melting the insulation and getting the joint hot as quick as you hold it secure/TIGHT/steady & working with clean wiring strands all to avoid burning the wire dark which hinders heat transfer. EDIT missed the gauge you are working with yes you need a butane mini torch
Last edited by RapidRobert; 11/25/12 05:23 PM.
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: I need a soldering iron recommendation...
[Re: pishta]
#1341122
11/25/12 09:49 PM
11/25/12 09:49 PM
|
Joined: May 2007
Posts: 1,443 Maryland
Dads426
pro stock
|
pro stock
Joined: May 2007
Posts: 1,443
Maryland
|
Weller 8200. Been using them since the 1960's. I have 3, one in the workshop, garage and spare (I use them every day) They are on ebay all the time. Radio Shack sells the tips. Buy a cheap Harbor Freight heat gun for heat shrink tubing.
2012 422 Allstars NSS Champion 2013 422 Allstars NSS Champion 2014 422 Allstars NSS Champion
|
|
|
Re: I need a soldering iron recommendation...
[Re: ahy]
#1341124
11/26/12 12:46 AM
11/26/12 12:46 AM
|
Joined: Jan 2003
Posts: 21,079 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,079
Niles , Ohio
|
Mine I got from SnapOn like 25 years ago.Has tips that you can change.It was like 40 bucks then.Still works great and if a tip goes bad you just buy new ones.I even soldered a few pin holes in my 65s gas tank with it.Rocky
Chrysler Firepower
|
|
|
Re: I need a soldering iron recommendation...
[Re: jlatessa]
#1341127
11/26/12 11:08 AM
11/26/12 11:08 AM
|
Joined: Mar 2007
Posts: 9,336 South-Central (Sebring), FL
Commando1
master
|
master
Joined: Mar 2007
Posts: 9,336
South-Central (Sebring), FL
|
Quote:
For splicing I use a method we had where I used to work called mousing sp?
You take a few strands of the same wire you're splicing and wrap it tightly around the joint, takes some practice but helps keep the joint from moving as you solder.
Joe
Brilliant. That's always my biggest problem. Thank you!
|
|
|
Re: I need a soldering iron recommendation...
[Re: Quicksilver440]
#1341130
11/26/12 12:18 PM
11/26/12 12:18 PM
|
Joined: Jan 2006
Posts: 8,162 USA
360view
Moparts resident spammer
|
Moparts resident spammer
Joined: Jan 2006
Posts: 8,162
USA
|
Resistence soldering is a good trick to know http://www.brunelhobbies.com.au/soldering/instruct/rsinstruct.htmIn a nutshell you use a current to heat up the parts using their own electrical resistance. Most welders will do this if you use carbon or tungsten rods as tips, but in a pinch just copper works. Solder will not stick to chrome plating which can also be useful. There is an episode of "How its Made" TV where they make eyeglass frames using resistance soldering.
|
|
|
|
|