The most interesting part of this is that we redid the engine the frist time reusing the customers old mega block. The block cracked a cylinder during the dyno session. Yes we sonic tested the block and was thick enough for the 4.530 bore that was used. All we did was replace the block with a Indy Aluminum block. It pulled more crank vac and made more HP than the iron block before it broke. We have a different ring combo for aluminum block we use every thing else was the same. So much for making less power with aluminum over iron blocks. This engine has the std cam core size and is not a rasied cam block. 4.750 crank, Crower steel rods, CP pistons, Predator CNC ported heads 1.8 rockers, our custom cam and Pro Systems carbs. If we did one like this again we would use a 55MM cam core, some extra porting and a better intake with Q-16 fuel. We used C-16 Fuel for this build.

One more

very nice numbers pete. hows mikes 655 coming along?

Pete, what do you honestly think that motor could do with a single carb? btw, killer #'s

How much more HP did it make with the indy block?

Awesome

awesome numbers Pete how much do you think it would make with q16 a55mm cam,headwork and a better manifold?you guys rock!!!!

I so need one of these for my Challenger build. I would love to run in our local "all motor" classes.

am i actually correct in figuring back,, to see fuel numbers to say that at 6000 the engine used more fuel than at 7500?? by just a few lbs though,, at 6000 it peaked, then went down, and came back up to about that number at the end of the pull..

thats alot of power for those parts

Pete,

Have you had a chance to see how good the cast tunnel ram works? I know it was a copy of somebodies sheet metal manifold but I was just curious if you guys have had a chance to try one.

I have the parts to put together a 596 with predators and I have the cast tunnel ram.

Great numbers!

Thanks!

Number 2

Who's main body on that carb?? Does not look like a BLP piece, in fact not sure it is a piece at all, but surely aint a Holley one

Why do those lines look like injector hoses??

love to have one that runs on pumpgas..so i could shake the streets on ny.

Very nice numbers, that should put a smile on anyones face.

I could tell ya but then I'd have ta kill ya.

It is a Waterman Injectorator!