I'm trying to put my convertible together enough to get it titled. Life took priority and I never got it titled back when I should have through Broadway. I have a factory manual but it doesn't explain the reassembly process. A friend who is a Ford guy said I needed an assembly manual. Can anyone recommend a good one? The problem I'm having is that all the bolts were bagged and tagged by the person who took it apart but some assemblies were combined and I can't seem to figure out what goes exactly where. Any help will be greatly appreciated!

What areas do you need detail on? I can take pics of mine depending on what you are looking for.

Same vehicle by the way

Thanks! It's more of a "which nut or bolt goes where" kind of thing. I'm putting the brake pedal and parking brake assemblies in. Next will be the wiper assembly, heater box, dash and steering column. I need a pic of the nuts and bolts that hold the brake pedal assembly in place and which ones go where as well as the same for the wiper assembly and steering column. A pic of your car would be pretty cool as well! Is your car done? Thanks again!

another suggestion is to post in the restoration area. over there many of the guys already have pics of these assemblies. if you post one assembly at a time you won't be bombarded with pic. again it would be helpful to you if you stated what you're working on......

ICCA has a "fastener guide" that may be the closest available for what you are looking for? '68-'70 Plymouth
Look under "RESTORATION REFERENCE MANUALS" - here's page 325-326 of the Plymouth book.

Mine is mostly together, but coming apart somewhat for bodywork, paint and new engine. Mostly to remove and replace parts that are worn out or damaged. For most things I can probably get pics of them.

6 bbl - that is exactly what I need! Thanks!