well im now in the tunnel ram club- i have a question - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech well im now in the tunnel ram club- i have a question

Print Thread

Page 2 of 3

1

2

3

Re: well im now in the tunnel ram club- i have a question [Re: shoebox] #1183407 02/22/12 06:00 PM 02/22/12 06:00 PM
Joined: Mar 2009 Posts: 2,459 Sydney,Australia tex013 top fuel
tex013 top fuel Joined: Mar 2009 Posts: 2,459 Sydney,Australia	biginch that sure is nice. do the M1 or Weiand tunnel rams fit under a sixpack scoop ?on a RB block don't look to sit too high sorry for the hijack shoebox Tex Last edited by Tex013; 02/22/12 06:03 PM. New best ET 10.259@129.65 . New best MPH 130.32 Finally fitted a solid cam, stepped it up a bit more 3690lbs through the mufflers New World block 3780lbs 10.278@130.80 . Wowser 10.253@130.24 footbraking from 1500rpm Power by Tex's Automotive

Re: well im now in the tunnel ram club- i have a question [Re: tex013] #1183408 02/22/12 06:39 PM 02/22/12 06:39 PM
Joined: Jan 2003 Posts: 2,360 PA 7 70HemiGTX top fuel
70HemiGTX top fuel 7 Joined: Jan 2003 Posts: 2,360 PA	I have 2 660 center squirters on mine. Changed some things around on them also....Still messing with the jets. 7085298-DSCF0006.JPG (473 downloads) Last edited by 70HemiGTX; 02/22/12 06:40 PM.

Re: well im now in the tunnel ram club- i have a question [Re: 70HemiGTX] #1183409 02/22/12 06:47 PM 02/22/12 06:47 PM
Joined: Nov 2010 Posts: 1,397 Carson City, Nevada Biginchmopar pro stock
Biginchmopar pro stock Joined: Nov 2010 Posts: 1,397 Carson City, Nevada	Tex, Yes it fits under the Unlimited fiberglass hood I have with a 6 pack scoop. Mine is a low deck with B1-BS heads.

Re: well im now in the tunnel ram club- i have a question [Re: Biginchmopar] #1183410 02/22/12 07:14 PM 02/22/12 07:14 PM
Joined: Mar 2009 Posts: 2,459 Sydney,Australia tex013 top fuel
tex013 top fuel Joined: Mar 2009 Posts: 2,459 Sydney,Australia	thanks Biginch, i have the UP22 sixpack hood with RB. though i have a 2 spd wiper - may hit rear carb just a thought anyway.maybe keep looking at the modman Tex New best ET 10.259@129.65 . New best MPH 130.32 Finally fitted a solid cam, stepped it up a bit more 3690lbs through the mufflers New World block 3780lbs 10.278@130.80 . Wowser 10.253@130.24 footbraking from 1500rpm Power by Tex's Automotive

Re: well im now in the tunnel ram club- i have a question [Re: MRMOPAR622] #1183411 02/22/12 07:14 PM 02/22/12 07:14 PM
Joined: Oct 2004 Posts: 5,618 long island NY A Ari440 master
Ari440 master A Joined: Oct 2004 Posts: 5,618 long island NY	two 850s 1.39 9.85 - 137 mph

Re: well im now in the tunnel ram club- i have a question [Re: Ari440] #1183412 02/22/12 07:34 PM 02/22/12 07:34 PM
Joined: Nov 2005 Posts: 808 mckinney texas S shoebox OP super stock
shoebox OP super stock S Joined: Nov 2005 Posts: 808 mckinney texas	ARI i like the regulator and line setup.. imight have to use your layout! 74 dart sport 440 www.Csucarbs.com

Re: well im now in the tunnel ram club- i have a question [Re: shoebox] #1183413 02/22/12 07:54 PM 02/22/12 07:54 PM
Joined: Feb 2007 Posts: 5,080 organ M maximum entropy master
maximum entropy master M Joined: Feb 2007 Posts: 5,080 organ	you know, those things don't look THAT tall... for what is the good life if not doing things thoughtfully?

Re: well im now in the tunnel ram club- i have a question [Re: maximum entropy] #1183414 02/22/12 07:59 PM 02/22/12 07:59 PM
Joined: Oct 2004 Posts: 5,618 long island NY A Ari440 master
Ari440 master A Joined: Oct 2004 Posts: 5,618 long island NY	5 1/2 tall sixpack scoop on my old MAZ liftoff hood the 4 inch tall scoop would not work 1.39 9.85 - 137 mph

Re: well im now in the tunnel ram club- i have a question [Re: Ari440] #1183415 02/22/12 08:03 PM 02/22/12 08:03 PM
Joined: Oct 2004 Posts: 5,618 long island NY A Ari440 master
Ari440 master A Joined: Oct 2004 Posts: 5,618 long island NY	throttle bracket from ANDYF made to work with a lokar cable 1.39 9.85 - 137 mph

Re: well im now in the tunnel ram club- i have a question [Re: shoebox] #1183416 02/22/12 09:19 PM 02/22/12 09:19 PM
Joined: Jan 2004 Posts: 3,837 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,837 Central Missouri Fort Leonard...	Quote: i just got my TR last night, its a weiand 5987 stage2. no cracks,mods,stripped holes etc. looks real good. when you look into the tops you can see where the upper meets the lower. there is a step there. like the lower openings need to be ported. is that a MUST DO? have you seen it worth 20 horse on the dyno? if i can leave it thats ok. stock stroke 440, 4800stall 6500rpm tell me anything you know of the history about the stage2.. any good? shoe box here is how far the two parts of my intake was off.i just bolted mine together and used some sanding rolls and ported the intake until every thing matched. i ran out of time and sanding disc to port match the intake runners.will do that next time i have the intake off.thanks mopar65 7085502-002.JPG (402 downloads) 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: well im now in the tunnel ram club- i have a question [Re: Ari440] #1183417 02/22/12 09:22 PM 02/22/12 09:22 PM
Joined: Jan 2004 Posts: 3,837 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,837 Central Missouri Fort Leonard...	Quote: throttle bracket from ANDYF made to work with a lokar cable can you show a close up of how you made the bracket work? that's going to be my next question soon. i mean what kind of throttle bracket i will need to hook up my lokar throttle cable to my tunnel ram. thanks Mopar65 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: well im now in the tunnel ram club- i have a question [Re: mopar65] #1183418 02/22/12 09:28 PM 02/22/12 09:28 PM
Joined: Oct 2004 Posts: 5,618 long island NY A Ari440 master
Ari440 master A Joined: Oct 2004 Posts: 5,618 long island NY	1.39 9.85 - 137 mph

Re: well im now in the tunnel ram club- i have a question [Re: Ari440] #1183419 02/22/12 09:38 PM 02/22/12 09:38 PM
Joined: Oct 2004 Posts: 5,618 long island NY A Ari440 master
Ari440 master A Joined: Oct 2004 Posts: 5,618 long island NY	1.39 9.85 - 137 mph

Re: well im now in the tunnel ram club- i have a question [Re: Ari440] #1183420 02/22/12 09:39 PM 02/22/12 09:39 PM
Joined: Oct 2004 Posts: 5,618 long island NY A Ari440 master
Ari440 master A Joined: Oct 2004 Posts: 5,618 long island NY	look at the bracket that bolts througth the manifold I used a cut off wheel and grinded the back bottem side so the trottle bracket would slide under oblonged the throttle bracket to slide up or down to adjust heigth found scrap metal 1 1/2 wide 3 inch long the top part of ANDYF,S bracket I cut it up and used the kickdon section and bolted it together ,the length of the lokar cable deremined where to bolt it together also with the cutoff wheel I cut a slit in the hole of the kickdown setion so I could slide the cable througth then taking it all apart Last edited by Ari440; 02/22/12 09:53 PM. 1.39 9.85 - 137 mph

Re: well im now in the tunnel ram club- i have a question [Re: Ari440] #1183421 02/22/12 09:45 PM 02/22/12 09:45 PM
Joined: Jan 2003 Posts: 2,360 PA 7 70HemiGTX top fuel
70HemiGTX top fuel 7 Joined: Jan 2003 Posts: 2,360 PA	I actually just used a factory throttle cable bracket with a Lokar cable. Don't know if you can see it. 7085549-DSCF0008.JPG (1780 downloads) Last edited by 70HemiGTX; 02/22/12 09:47 PM.

Re: well im now in the tunnel ram club- i have a question [Re: shoebox] #1183422 02/22/12 09:58 PM 02/22/12 09:58 PM
Joined: Sep 2009 Posts: 176 South Bend, Indiana mistress member
mistress member Joined: Sep 2009 Posts: 176 South Bend, Indiana	I also am using a factory bracket that has been modified with lokar cable, also a belt drive fuel pump with return system and bypass regulator off fuel block i made. (I am using methanol) 7085567-leftside3.jpg (4325 downloads)

Re: well im now in the tunnel ram club- i have a question [Re: mistress] #1183423 02/23/12 02:39 AM 02/23/12 02:39 AM
Joined: Feb 2010 Posts: 48 Pa W W7_Scamp member
W7_Scamp member W Joined: Feb 2010 Posts: 48 Pa	Shoebox whats ur combo? I have that exact intake on my street car. I had 2 450 mechanical secondary carbs on it and ran 11.70 took them off put on 2 600 vac secondary carbs and ran 11.50's the 600's also had metering plates put in the back. .030 over 440 w factory heads cleaned up a bit and comp solid lift 570? lift cam 3500 converter and a whopping 323 gear. My 60ft's were a tad better w the 450's but the 600's picked up every where else. best 60 was like 1.79 and fastest mph was 119. I have a good friend that picked up 3 tenths by switching from 600's to 660's that's my next direction but first gotta get rid of those 323's I ran it to 6600 in drive on the highway and it felt like i was holding onto a hand gernade!

Re: well im now in the tunnel ram club- i have a question [Re: W7_Scamp] #1183424 02/23/12 02:53 AM 02/23/12 02:53 AM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	is that indy intake only drilled for sideways mounted carbs? Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: well im now in the tunnel ram club- i have a question [Re: sixpackgut] #1183425 02/23/12 09:58 AM 02/23/12 09:58 AM
Joined: Dec 2009 Posts: 20,631 in a cattle trailer down by th... G Guitar Jones Paddle faster! I hear banjo music!
Guitar Jones Paddle faster! I hear banjo music! G Joined: Dec 2009 Posts: 20,631 in a cattle trailer down by th...	I didn't know there was a club. I use 2 Demon 750TR carbs on my 408 small block. I did have to match the two halves of the M1 TR too. My Demons are pretty much right out of the box with only jet and squirter changes. They work great but yeah I had to fix a few things on them like the stripped squirter screw holes and one of the base plates was assembled backwards. "Follow me the wise man said, but he walked behind" '92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost coming soon! 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.

Re: well im now in the tunnel ram club- i have a question [Re: W7_Scamp] #1183426 02/23/12 12:07 PM 02/23/12 12:07 PM
Joined: Nov 2005 Posts: 808 mckinney texas S shoebox OP super stock
shoebox OP super stock S Joined: Nov 2005 Posts: 808 mckinney texas	Quote: Shoebox whats ur combo? I have that exact intake on my street car. I had 2 450 mechanical secondary carbs on it and ran 11.70 took them off put on 2 600 vac secondary carbs and ran 11.50's the 600's also had metering plates put in the back. .030 over 440 w factory heads cleaned up a bit and comp solid lift 570? lift cam 3500 converter and a whopping 323 gear. My 60ft's were a tad better w the 450's but the 600's picked up every where else. best 60 was like 1.79 and fastest mph was 119. I have a good friend that picked up 3 tenths by switching from 600's to 660's that's my next direction but first gotta get rid of those 323's I ran it to 6600 in drive on the highway and it felt like i was holding onto a hand gernade! 440 2295S fully ported stealth heads comp solid 250 256 560 108 2 inch pro parts TR with 2 650dps ultimate 4500-4800 3.73s for now 4.30smax electric wp alum rad etc. light as i can but keep my full interior clovis had that exact cam with his TR and was 10.8s 124 i think? 74 dart sport 440 www.Csucarbs.com

Page 2 of 3

1

2

3

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1