Aluminum Oil Pan Project BB road race
#1164750
01/25/12 09:04 PM
01/25/12 09:04 PM
|
Joined: Jan 2003
Posts: 1,376 NORTHERN CA
HUSTLESTUFF
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,376
NORTHERN CA
|
I've been working on the pan for about a week with my buddy Edd. Learning a great deal on aluminum fabrication. Pan rails will be 3/8 with a gated sump similar to the Milodon pan. I made my own pickup and because of fast ratio arms I don't need the cuts at the rear of the pan. Almost finished with mock up and will clean up and go to a great welder to be done when he gets to it. Here's a few pics. Up next will be some UCA's. Mike
"Were in it to win it. Anything less will end up being..... A whole lot of fun doing!!" UNLAWFL RIP UN
|
|
|
Re: Aluminum Oil Pan Project BB road race
[Re: HUSTLESTUFF]
#1164753
01/25/12 09:07 PM
01/25/12 09:07 PM
|
Joined: Jan 2003
Posts: 1,376 NORTHERN CA
HUSTLESTUFF
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,376
NORTHERN CA
|
With Milodon internal pickup
"Were in it to win it. Anything less will end up being..... A whole lot of fun doing!!" UNLAWFL RIP UN
|
|
|
Re: Aluminum Oil Pan Project BB road race
[Re: HUSTLESTUFF]
#1164757
01/25/12 10:09 PM
01/25/12 10:09 PM
|
Joined: Jan 2003
Posts: 1,037 Texas, Dallas
G_T
super stock
|
super stock
Joined: Jan 2003
Posts: 1,037
Texas, Dallas
|
Nice work! What's the wall thickness of the pan itself?
1970 Charger - V10, 6spd, Alterkation, Street Lynx 4 Link, Moser Dana 60, Wilwood 14" disks, Forgeline 18" Wheels (Rear:335's), ISIS Multiplexing Wiring http://www.v10mopar.com
2012 Charger SRT8
|
|
|
|
|