Has anyone built a stroker motor using the Koleno block? Just curious, John.

i have a best machine built 588 b1 pso with a 55mm cam,the block is a awesome piece.the car is going back togeather thiswinter i should have some et numbers in the spring,along with in car video from cudafied.

540ci Best did mine also.

I have with B1 originals from Koffels Place

Do they offer these blocks with a raised cam version?

building a 572, short block is done .bought block thru koffels (mich),had nick at compuflow do machine work on.decked ,line bored,final bore,crank clearanced. Had to have a sleeve made for rear cam bearing it was over machined from roush.

588" std.cam location. 4.625 stroke. 2.2 journals. GRP pro billet rods. Done by Best also.

Thanks for all the support guys....we COULD NOT be doing this without you

Go to BEST in Detroit. They are a distributor/dealer I believe and can machine a hair in three parts. Very cool and great know how in that shop.

Sorry fellas, I've been trying to get a chance to take some good pics of the blocks that we have been getting back but they aren't sitting here very long. Hopefully we will be able to catch back up soon