Re: Go Pro cameras on race car suspension
[Re: Bigbeep]
#1146162
12/31/11 12:24 PM
12/31/11 12:24 PM
|
Joined: Jun 2004
Posts: 2,360 Mobile Alabama
SB412DUSTER
top fuel
|
top fuel
Joined: Jun 2004
Posts: 2,360
Mobile Alabama
|
Quote:
Thanks guys. SB412Duster, do you have any video you can post? Thanks, Beep
I do have some, but they are on my racecar laptop and I will have to get it out of the trailer and up load them. It may take a day or so
|
|
|
Re: Go Pro cameras on race car suspension
[Re: WheelsUp73]
#1146163
12/31/11 04:32 PM
12/31/11 04:32 PM
|
Joined: Apr 2007
Posts: 1,165 Central Ohio, USA
Bigbeep
OP
super stock
|
OP
super stock
Joined: Apr 2007
Posts: 1,165
Central Ohio, USA
|
Quote:
Still the stock suspension with a few up grades.
The reason I asked was, I noticed the bump steer issues have been corrected in your other video. I am looking to address some of this stuff this winter. Any helpful tips? I was going to use the DC chassis manual. Thanks, Beep
|
|
|
Re: Go Pro cameras on race car suspension
[Re: Bigbeep]
#1146170
01/02/12 03:33 PM
01/02/12 03:33 PM
|
Joined: Sep 2011
Posts: 369 California, USA!!!
WheelsUp73
enthusiast
|
enthusiast
Joined: Sep 2011
Posts: 369
California, USA!!!
|
Quote:
Quote:
Still the stock suspension with a few up grades.
The reason I asked was, I noticed the bump steer issues have been corrected in your other video. I am looking to address some of this stuff this winter. Any helpful tips? I was going to use the DC chassis manual. Thanks, Beep
We boxed in the lower arms and tightened up the t-bar pivots, Reiley motorsports soild strut rods and upper control arms with heim joints,11/16 tie rods and PST adjusting sleeves, firmfeel pivot pins and poly bushings and new upper and lower balljoints.I have pics if interested.
|
|
|
Re: Go Pro cameras on race car suspension
[Re: WheelsUp73]
#1146171
01/03/12 03:44 AM
01/03/12 03:44 AM
|
Joined: Apr 2007
Posts: 1,165 Central Ohio, USA
Bigbeep
OP
super stock
|
OP
super stock
Joined: Apr 2007
Posts: 1,165
Central Ohio, USA
|
Quote:
Quote:
Quote:
Still the stock suspension with a few up grades.
The reason I asked was, I noticed the bump steer issues have been corrected in your other video. I am looking to address some of this stuff this winter. Any helpful tips? I was going to use the DC chassis manual. Thanks, Beep
We boxed in the lower arms and tightened up the t-bar pivots, Reiley motorsports soild strut rods and upper control arms with heim joints,11/16 tie rods and PST adjusting sleeves, firmfeel pivot pins and poly bushings and new upper and lower balljoints.I have pics if interested.
Please. Any help is appreciated. Thanks, Beep
|
|
|
|
|