Re: w9 cnc heads
[Re: W5DART66]
#1140641
02/10/12 12:32 PM
02/10/12 12:32 PM
|
Joined: Nov 2004
Posts: 4,330 Lynchburg, VA
Leon441
master
|
master
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
|
My CFE w8's had a sleeve where the head stud area was broken through. They also used a 7/16 head stud instead of the 1/2". Was told the sleeve was to strengthen the head so the head stud when torqued down would not crack the head. Probaly less chance of cracking the head with the less torque the 7/16 bolts require to stretch the stud.
Leon
Career best 8.02 @ 169 at 3050# and 10" tires small block power.
|
|
|
Re: w9 cnc heads
[Re: Otherlane]
#1140648
02/15/12 03:26 AM
02/15/12 03:26 AM
|
Joined: Nov 2010
Posts: 1,397 Carson City, Nevada
Biginchmopar
pro stock
|
pro stock
Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
|
Man that is real good! Do ever work on Big Blocks? I just bought a set of W9's and with those kind of numbers you could make some serious power. I was going to build a 440 small block, I might have to rethink that and go a bit bigger. I would really like to get those kind of number out of a set of B1-BS heads.
|
|
|
Re: w9 cnc heads
[Re: W5DART66]
#1140654
02/15/12 01:41 PM
02/15/12 01:41 PM
|
Joined: Jan 2003
Posts: 1,784 PA
W5DART66
OP
top fuel
|
OP
top fuel
Joined: Jan 2003
Posts: 1,784
PA
|
|
|
|
Re: w9 cnc heads
[Re: W5DART66]
#1140655
02/15/12 01:42 PM
02/15/12 01:42 PM
|
Joined: Jan 2003
Posts: 1,784 PA
W5DART66
OP
top fuel
|
OP
top fuel
Joined: Jan 2003
Posts: 1,784
PA
|
|
|
|
Re: w9 cnc heads
[Re: sshemi]
#1140658
02/15/12 08:53 PM
02/15/12 08:53 PM
|
Joined: Jan 2003
Posts: 1,784 PA
W5DART66
OP
top fuel
|
OP
top fuel
Joined: Jan 2003
Posts: 1,784
PA
|
Quote:
How many cc intake runner?
Will have to cc one should be about 290cc to 300cc
|
|
|
|
|