Re: HP for 200mph
[Re: Den300]
#1115672
11/18/11 10:47 AM
11/18/11 10:47 AM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
Quote:
Quote:
http://so1968.so.ohost.de/cars3.html
the guy with the silver coronet (Matt) goes 191mph on a german highway. Might send him a mail. Car could go faster. it is a 440 with some good internal parts.
Dennis
Why yea, some template ported 906's, and atleast a 509 purple shaft.... LOL
no, he now has some indy heads, mechanical flat tapped cam, dual quads and a 2:76 gear. maybe for you in the states 190mph is magic, but here we have lots of cars running 200mph with less than 2000hp! 190mph is 306km/h and that is what he drove. measured with gps. for what do you need 2000hp? for sure not to reach 200mph. an unlocked BMW M6 is close to 200mph and has little over 500hp.
I think the difference is he wants to do it in a 1/4 mile...not on a 2 mile run. apples and oranges.
|
|
|
Re: HP for 200mph
[Re: hemiiroc]
#1115673
11/18/11 10:49 AM
11/18/11 10:49 AM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
Quote:
Quote:
My car currently has 730hp and runs 10's. Car feels really slow to me now. Thinking about really stepping it up to bring back the fun. Thinking big turbo motor.
you should be well into the 9's w/ that kind of power. To hit 200 you might need to do a few things. Lighten the car up. Block off the grill, use a front spoiler lower the car.... I used an online calculator and a 3650 lb car would need about 1400 hp to hit 200 in the 1/4. Not saying that's too much or not enough, just what the computer spit out. As mentioned a wedged shaped car is going to do it easier than a brick.
1400 in a 3650lb car won't get anywhere close to 200
just used a different calculator and it spat out 2227hp. Wonder why the difference???
|
|
|
Re: HP for 200mph
[Re: Cab_Burge]
#1115679
11/19/11 10:56 AM
11/19/11 10:56 AM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
I believe several old NASCAR Hemi Chargers, not Daytona Chargers, set several top end and close course records that where over 200 MPH a long time ago with NASCAR legal 432 C.I. Hemi 426 motors with single four barrel carbs on race gas
again...different ball of wax. 1/4 mile is way different than a speedway car. They have what 2 miles to build up speed?
|
|
|
Re: HP for 200mph
[Re: Mr.Yuck]
#1115680
11/19/11 11:19 AM
11/19/11 11:19 AM
|
Joined: Feb 2003
Posts: 8,020 Pangaea
B5 Bee
master
|
master
Joined: Feb 2003
Posts: 8,020
Pangaea
|
1/4 mile, 2165HP to run 200MPH at 3500lbs
Last edited by B5 Bee; 11/19/11 11:20 AM.
|
|
|
Re: HP for 200mph
[Re: hemiiroc]
#1115681
11/19/11 11:24 AM
11/19/11 11:24 AM
|
Joined: Feb 2003
Posts: 8,020 Pangaea
B5 Bee
master
|
master
Joined: Feb 2003
Posts: 8,020
Pangaea
|
Quote:
Quote:
Quote:
My car currently has 730hp and runs 10's. Car feels really slow to me now. Thinking about really stepping it up to bring back the fun. Thinking big turbo motor.
you should be well into the 9's w/ that kind of power. To hit 200 you might need to do a few things. Lighten the car up. Block off the grill, use a front spoiler lower the car.... I used an online calculator and a 3650 lb car would need about 1400 hp to hit 200 in the 1/4. Not saying that's too much or not enough, just what the computer spit out. As mentioned a wedged shaped car is going to do it easier than a brick.
1400 in a 3650lb car won't get anywhere close to 200
Car would have to weigh 2264 lbs to run 2000 MPH with 1400 HP
|
|
|
|
|