|
Re: fluid damper inst help
[Re: Thumperdart]
#1076813
09/18/11 02:01 PM
09/18/11 02:01 PM
|
Joined: Dec 2006
Posts: 3,395 Pa
Hot 340
master
|
master
Joined: Dec 2006
Posts: 3,395
Pa
|
Quote:
Quote:
Did you check the clearances? Alot of dampers, if not most, need honed to fit.
Bingo...........mike the crank snout and the id of the dampner and go from there. Mine was about a .002 press fit iirc.
.002 is awful tight. I would go .0015 to .001 press fit.
|
|
|
Re: fluid damper inst help
[Re: Hot 340]
#1076814
09/18/11 03:24 PM
09/18/11 03:24 PM
|
Joined: Jul 2004
Posts: 19,317 State of confusion
Thumperdart
I Live Here
|
I Live Here
Joined: Jul 2004
Posts: 19,317
State of confusion
|
Again, that was off the top of my head so who knows.
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
|
|
|
|
|
|