Headed for the track - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Headed for the track

Print Thread

Headed for the track #1074452 09/13/11 04:59 PM 09/13/11 04:59 PM
Joined: Oct 2008 Posts: 492 South Jersey, NJ D DragDart360 OP mopar
DragDart360 OP mopar D Joined: Oct 2008 Posts: 492 South Jersey, NJ	I finally got my Harland Sharp rockers and Manton pushrods and installed them yesterday set lash warmed it up and reset. Now it's time to go to the track and see if it'll run better than 10.59. My guess is much better! New sig soon! 70 Dart Swinger, 2850 lbs SB 408, Bullet roller 264/268 @50 .636 SSDS stage 2 Edelbrock heads, 1 7/8 Headmans, 1050 dominator by Dom, 9.867 @ 133

Re: Headed for the track [Re: DragDart360] #1074453 09/13/11 05:07 PM 09/13/11 05:07 PM
Joined: Mar 2008 Posts: 1,596 BX, CT, FL. B B1KILLER pro stock
B1KILLER pro stock B Joined: Mar 2008 Posts: 1,596 BX, CT, FL.	Much Luck, Go Fast

Re: Headed for the track [Re: B1KILLER] #1074454 09/13/11 06:07 PM 09/13/11 06:07 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Good luck. I have Manton pushrods also. Great service and very nice pushrods. Ron Last edited by 383man; 09/13/11 06:08 PM.

Re: Headed for the track [Re: 383man] #1074455 09/13/11 06:28 PM 09/13/11 06:28 PM
Joined: Aug 2008 Posts: 4,085 Mo. racerx master
racerx master Joined: Aug 2008 Posts: 4,085 Mo.	Good luck at the track just received my Harland's yesterday plan on installing them tomorrow..........

Re: Headed for the track [Re: racerx] #1074456 09/13/11 08:20 PM 09/13/11 08:20 PM
Joined: Jan 2003 Posts: 9,146 Now - Port Orange,Fla. Former... MIKES_DUSTER master
MIKES_DUSTER master Joined: Jan 2003 Posts: 9,146 Now - Port Orange,Fla. Former...	GOOD LUCK!!!!!! I got my Maonto Series 3's last month and they were REAL nice!!!!

Re: Headed for the track [Re: racerx] #1074457 09/13/11 11:15 PM 09/13/11 11:15 PM
Joined: Oct 2008 Posts: 492 South Jersey, NJ D DragDart360 OP mopar
DragDart360 OP mopar D Joined: Oct 2008 Posts: 492 South Jersey, NJ	Quote: Good luck at the track just received my Harland's yesterday plan on installing them tomorrow.......... Much nicer than the PRW and almost no fitting to get the proper spacing I spent a full day fitting the PRW's. Only got two runs, It ran a 10.56 and a 10.57 both at 126 I know it has more with a little tuning but right where I wanted to be 70 Dart Swinger, 2850 lbs SB 408, Bullet roller 264/268 @50 .636 SSDS stage 2 Edelbrock heads, 1 7/8 Headmans, 1050 dominator by Dom, 9.867 @ 133

Re: Headed for the track [Re: DragDart360] #1074458 09/13/11 11:18 PM 09/13/11 11:18 PM
Joined: Jan 2003 Posts: 9,146 Now - Port Orange,Fla. Former... MIKES_DUSTER master
MIKES_DUSTER master Joined: Jan 2003 Posts: 9,146 Now - Port Orange,Fla. Former...	Its consistent!!!!

Re: Headed for the track [Re: MIKES_DUSTER] #1074459 09/14/11 12:44 AM 09/14/11 12:44 AM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	What did you do to your Dart to pic up a second in et over your sig et ?? Ron

Re: Headed for the track [Re: 383man] #1074460 09/14/11 10:06 AM 09/14/11 10:06 AM
Joined: Jan 2003 Posts: 9,146 Now - Port Orange,Fla. Former... MIKES_DUSTER master
MIKES_DUSTER master Joined: Jan 2003 Posts: 9,146 Now - Port Orange,Fla. Former...	Quote: What did you do to your Dart to pic up a second in et over your sig et ?? Ron Ron, He built a NICE SB stroker motor!!!!!!

Re: Headed for the track [Re: 383man] #1074461 09/14/11 10:17 AM 09/14/11 10:17 AM
Joined: Oct 2008 Posts: 492 South Jersey, NJ D DragDart360 OP mopar
DragDart360 OP mopar D Joined: Oct 2008 Posts: 492 South Jersey, NJ	Quote: What did you do to your Dart to pic up a second in et over your sig et ?? Ron SB stroker 408", Forged crank, rods, pistons, 11-1 comp, Ported Eddy's, matched Victor intake. HS 1.6 rockers, Manton pushrods. It's all going in my new sig in a week or so. It's got more coming when I get my large tube headers, big carb, and a good converter at some point. 70 Dart Swinger, 2850 lbs SB 408, Bullet roller 264/268 @50 .636 SSDS stage 2 Edelbrock heads, 1 7/8 Headmans, 1050 dominator by Dom, 9.867 @ 133

Re: Headed for the track [Re: DragDart360] #1074462 09/14/11 12:01 PM 09/14/11 12:01 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Ok now I understand. Ron

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1