nEED FUEL PUMP DRIVE BELT ASAP!
#1063950
08/27/11 03:25 PM
08/27/11 03:25 PM
|
Joined: Jan 2003
Posts: 9,997 Frostbitefalls MN (Rocky&Bullw...
gregsdart
OP
master
|
OP
master
Joined: Jan 2003
Posts: 9,997
Frostbitefalls MN (Rocky&Bullw...
|
I am at BIR in Brainerd MN and the drive belt for my injector pump is broken. Any one know where I can get a 25.5 long by 1/2 wide cog belt for a fuel injection pump? I am desperate! Why the one box with the spare belt never came with is a mystry, other than being my fault! Call if you know of a source. Thanks, Greg 763 439 2129
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: nEED FUEL PUMP DRIVE BELT ASAP!
[Re: gregsdart]
#1063951
08/27/11 03:28 PM
08/27/11 03:28 PM
|
Joined: Mar 2004
Posts: 2,475 SW Ohio
cgall
top fuel
|
top fuel
Joined: Mar 2004
Posts: 2,475
SW Ohio
|
Grainger?
345 Plato Blvd E Ste 120 St. Paul, MN 55107-1228 Phone: (651) 298-9601
Last edited by cgall; 08/27/11 03:31 PM.
|
|
|
Re: nEED FUEL PUMP DRIVE BELT ASAP!
[Re: gregsdart]
#1063956
08/27/11 04:45 PM
08/27/11 04:45 PM
|
Joined: Jan 2003
Posts: 16,925 NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,925
NC
|
Quote:
Any one know where I can get a 25.5 long by 1/2 wide cog belt for a fuel injection pump?
Sorry, my injection pump belt is 220XL037 (22.0").
|
|
|
Re: nEED FUEL PUMP DRIVE BELT ASAP!
[Re: 440Jim]
#1063957
08/28/11 08:41 AM
08/28/11 08:41 AM
|
Joined: Jan 2003
Posts: 9,997 Frostbitefalls MN (Rocky&Bullw...
gregsdart
OP
master
|
OP
master
Joined: Jan 2003
Posts: 9,997
Frostbitefalls MN (Rocky&Bullw...
|
Yesterday was my lucky day. The Gopher State Timing Association team had the belt I needed! We ride today! Lookin for a fast pass, car went 8.94 at 139, surging after the 2/3 shift (belt was slipping) and shutting down at 1200 ft when it let go! Exhaust temp showed 1225, about 50 degrees more than it should for the air temp!
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: nEED FUEL PUMP DRIVE BELT ASAP!
[Re: gregsdart]
#1063958
08/28/11 11:26 AM
08/28/11 11:26 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Yesterday was my lucky day. The Gopher State Timing Association team had the belt I needed! We ride today! Lookin for a fast pass, car went 8.94 at 139, surging after the 2/3 shift (belt was slipping) and shutting down at 1200 ft when it let go! Exhaust temp showed 1225, about 50 degrees more than it should for the air temp!
Glad you found one Greg
|
|
|
Re: nEED FUEL PUMP DRIVE BELT ASAP!
[Re: MR_P_BODY]
#1063959
08/28/11 02:06 PM
08/28/11 02:06 PM
|
Joined: Jan 2003
Posts: 2,813 Blue Ridge, VA
Plumb Wired
master
|
master
Joined: Jan 2003
Posts: 2,813
Blue Ridge, VA
|
For future reference any national bearing & power transmission house like Applied Industrial, Motion or Kaman should stock timing belts. Grainger would be another good source.
Mike Gray
RIP Monte Smith
aka: OutlawFish '98 Bickel Dodge Dakota PST
|
|
|
|
|