mopar R block and well known head porter - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech mopar R block and well known head porter

Print Thread

Page 3 of 3

1

2

3

Re: mopar R block and well known head porter [Re: kotacars] #1062331 12/20/11 07:30 PM 12/20/11 07:30 PM
Joined: Apr 2008 Posts: 126 mass K kotacars OP member
kotacars OP member K Joined: Apr 2008 Posts: 126 mass	well I would like to thank Ryan for stepping up and helping me with this engine. 387ci just came off the dyno 612hp at 6600 and 538 at 5200 . Over all I am very happy this is a street engine with a small roller cam which may never see a 1/4 track. Thanks Ryan After looking over the Dyno sheet this thing makes killer torque from 4500 to 6500 rpms makes no less than 500 ft lbs Last edited by 406ciW5; 12/22/11 08:58 AM.

Re: mopar R block and well known head porter [Re: kotacars] #1062332 12/20/11 07:59 PM 12/20/11 07:59 PM
Joined: Nov 2009 Posts: 3,082 St. Paul , Mn. tubtar master
tubtar master Joined: Nov 2009 Posts: 3,082 St. Paul , Mn.	Pump gas , or am I being optimistic ? Still very stout numbers for a streeter. Care to share cam specs ? I am glad this tale has a happy ending.........not surprised. Just glad.

Re: mopar R block and well known head porter [Re: tubtar] #1062333 12/20/11 09:25 PM 12/20/11 09:25 PM
Joined: Sep 2005 Posts: 12,481 Chino Valley RodStRace I Live Here
RodStRace I Live Here Joined: Sep 2005 Posts: 12,481 Chino Valley	I had not seen the thread before, so I want to thank the poster for coming back and telling the rest of the story. All too often people come on here and ask about stuff and never finish the conversation with the results.

Re: mopar R block and well known head porter [Re: tubtar] #1062334 12/21/11 11:34 PM 12/21/11 11:34 PM
Joined: Jan 2003 Posts: 8,547 State College, PA RyanJ moparts member
RyanJ moparts member Joined: Jan 2003 Posts: 8,547 State College, PA	Pump gas, 11:1 Cam is 242/246 @ .050" .624"/.588" Lift with 1.7/1.6 T&D's 106 LSA Cam is Hydraulic roller Bullet grind that I ran Comp 8043 solid roller lifters on. Here is a video of it on dyno yesterday.... http://www.youtube.com/watch?v=IXY6foVD_GA

Re: mopar R block and well known head porter [Re: RyanJ] #1062335 12/21/11 11:50 PM 12/21/11 11:50 PM
Joined: Feb 2003 Posts: 3,998 GO BUCKS !!!!!!! 3 340RICK master
340RICK master 3 Joined: Feb 2003 Posts: 3,998 GO BUCKS !!!!!!!	Ryan is back

Re: mopar R block and well known head porter [Re: RyanJ] #1062336 12/22/11 09:55 AM 12/22/11 09:55 AM
Joined: Nov 2009 Posts: 3,082 St. Paul , Mn. tubtar master
tubtar master Joined: Nov 2009 Posts: 3,082 St. Paul , Mn.	Quote: Pump gas, 11:1 Cam is 242/246 @ .050" .624"/.588" Lift with 1.7/1.6 T&D's 106 LSA Cam is Hydraulic roller Bullet grind that I ran Comp 8043 solid roller lifters on. Here is a video of it on dyno yesterday.... http://www.youtube.com/watch?v=IXY6foVD_GA Thanks Ryan. I am getting close to the dyno for mine and this info gives me some idea of what to expect. I might have more motor than chassis though.........bummer.

Re: mopar R block and well known head porter [Re: tubtar] #1062337 12/22/11 06:46 PM 12/22/11 06:46 PM
Joined: May 2009 Posts: 288 IL. Jerseyville J jg309 enthusiast
jg309 enthusiast J Joined: May 2009 Posts: 288 IL. Jerseyville	heek i live in illions & have ryan do my work, real stand up guy,second to none,thanks for all your time & great work for me, your #1 in my book, jg309,xr2 circle track guy

Page 3 of 3

1

2

3

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1