Edelbrock Victor heads: post your combos, please!!! - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Edelbrock Victor heads: post your combos, please!!!

Print Thread

Page 2 of 4

1

2

3

4

Re: Edelbrock Victor heads: post your combos, please!!! [Re: sixpackgut] #1049276 08/10/11 10:47 AM 08/10/11 10:47 AM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Quote: Quote: I can only post the parts that will be going together, not any actual results from using them. how about some pics of those fancy victors? what rocker did you end up using? I posted some pics of them a ways back on this thread: https://board.moparts.org/ubbthreads/show...rue#Post6188397 I picked up a set of Hughes' rockers in 1.6/1.5 ratio to use w/ the Victors to run on some RAS shafts.

Re: Edelbrock Victor heads: post your combos, please!!! [Re: BradH] #1049277 08/10/11 12:14 PM 08/10/11 12:14 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	Quote: Quote: Quote: I can only post the parts that will be going together, not any actual results from using them. how about some pics of those fancy victors? what rocker did you end up using? I posted some pics of them a ways back on this thread: https://board.moparts.org/ubbthreads/show...rue#Post6188397 I picked up a set of Hughes' rockers in 1.6/1.5 ratio to use w/ the Victors to run on some RAS shafts. wow, missed that post and i stalk yours Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: Edelbrock Victor heads: post your combos, please!!! [Re: sixpackgut] #1049278 08/10/11 03:20 PM 08/10/11 03:20 PM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Quote: wow, missed that post and i stalk yours Considering you know where I live (and have even been to my house even though I wasn't there at the time), that's kind of scary...

Re: Edelbrock Victor heads: post your combos, please!!! [Re: BradH] #1049279 08/10/11 04:03 PM 08/10/11 04:03 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	Quote: Quote: wow, missed that post and i stalk yours Considering you know where I live (and have even been to my house even though I wasn't there at the time), that's kind of scary... i just wanted to leave a reminder on the importance of useing oil in an engine Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: Edelbrock Victor heads: post your combos, please!!! [Re: sixpackgut] #1049280 08/10/11 07:51 PM 08/10/11 07:51 PM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Quote: i just wanted to leave a reminder on the importance of useing oil in an engine You should just stick to posting pictures of your girlfriend wearing nothing but a 5-point harness. /

Re: Edelbrock Victor heads: post your combos, please!!! [Re: BradH] #1049281 08/10/11 08:12 PM 08/10/11 08:12 PM
Joined: Nov 2003 Posts: 5,160 Texas dannysbee master
dannysbee master Joined: Nov 2003 Posts: 5,160 Texas	You got a link to those pictures Brad? Getting old just means you were smarter than some and luckier than others.

Re: Edelbrock Victor heads: post your combos, please!!! [Re: dannysbee] #1049282 08/14/11 02:28 PM 08/14/11 02:28 PM
Joined: Oct 2003 Posts: 1,170 Westbury, NY B bumps440 super gas
bumps440 super gas B Joined: Oct 2003 Posts: 1,170 Westbury, NY	Want to keep this active. what manifolds are the best on these with MW ports? there are many indys to chooses from and the Edelbrock Super victor for max wedge ports 2893 Any one done any testing lately.

Re: Edelbrock Victor heads: post your combos, please!!! [Re: bumps440] #1049283 08/14/11 08:00 PM 08/14/11 08:00 PM
Joined: Aug 2006 Posts: 2,141 junction city oregon V viperblue72 OP top fuel
viperblue72 OP top fuel V Joined: Aug 2006 Posts: 2,141 junction city oregon

Re: Edelbrock Victor heads: post your combos, please!!! [Re: viperblue72] #1049284 01/04/12 04:59 PM 01/04/12 04:59 PM
Joined: Jan 2003 Posts: 25,920 United Socialist States of Ame... T tboomer Too Many Posts
tboomer Too Many Posts T Joined: Jan 2003 Posts: 25,920 United Socialist States of Ame...	Thought I would bring this back up again!! Any of you guys make the move to the Victors? Need your rear end checked out? Contact Grizzly!!

Re: Edelbrock Victor heads: post your combos, please!!! [Re: tboomer] #1049285 01/04/12 05:31 PM 01/04/12 05:31 PM
Joined: Oct 2011 Posts: 559 Idaho L LaRoy Engines mopar
LaRoy Engines mopar L Joined: Oct 2011 Posts: 559 Idaho	LaRoy Ported Edelbrock 440 Victors 500 ci/440 Wedge 1090 King Demon Indy 3X Intake Erson Solid Roller 280/288 @ .050" Harland Sharp 1.6 rockers 440 Source Stroker Kit 14.5:1 on E85 600 lb-ft 5100-7300 rpm 650 lb-ft 5400-6400 rpm 658 lb-ft @ 6000 rpm 800 hp 6600-7400+ rpm 846 hp @ 7200 rpm

Re: Edelbrock Victor heads: post your combos, please!!! [Re: tboomer] #1049286 01/04/12 08:38 PM 01/04/12 08:38 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Quote: John....I should have said the EZ-1..If I keep my car,Those are the ones I want..Now...Back to the Victors!!! Thats what I am using the EZ heads. But I dont think they will flow as good as other Indy heads or the Victors because the exh is not raised. I mean they work very good I just believe the Victors and Indy -1 heads flow even better. Ron

Re: Edelbrock Victor heads: post your combos, please!!! [Re: 383man] #1049287 01/04/12 08:47 PM 01/04/12 08:47 PM
Joined: Jan 2003 Posts: 25,920 United Socialist States of Ame... T tboomer Too Many Posts
tboomer Too Many Posts T Joined: Jan 2003 Posts: 25,920 United Socialist States of Ame...	Ron...Your car works very well! Dwayne did good on those heads! And heyoldguy...That there is pretty stout!! Need your rear end checked out? Contact Grizzly!!

Re: Edelbrock Victor heads: post your combos, please!!! [Re: tboomer] #1049288 01/04/12 09:15 PM 01/04/12 09:15 PM
Joined: Aug 2006 Posts: 2,141 junction city oregon V viperblue72 OP top fuel
viperblue72 OP top fuel V Joined: Aug 2006 Posts: 2,141 junction city oregon	Seems like brian at imm engines (ou812)has an article coming out about them? Or maybe its super stealths I can't remember.

Re: Edelbrock Victor heads: post your combos, please!!! [Re: tboomer] #1049289 01/04/12 09:16 PM 01/04/12 09:16 PM
Joined: Jan 2003 Posts: 9,875 Weddington, N.C. Streetwize master
Streetwize master Joined: Jan 2003 Posts: 9,875 Weddington, N.C.	When I do another Big block I will definately try the Vics; I bought my Chapman 285's after the success Steve Dulcich had in our Engine Masters competition and they're awesome heads but they're tough to find, It looks like the cnc and professional porters have found the program that will pretty near match them on flow. They weren't available when I built my last MW stroker though and although I think a CNC Indy-1 is still the ultimate for drag racing, the higher velocity ports of the Vics should be better for a dual purpose motor in terms of mid range and roll on torque. If there's one thing I do prefer on the Chaps is the Ability to run the RB Wax Wedge intakes on a low deck, Apparently every once in a while Ma has a good idea by accident. I also like the B1 sytle billet pedestals which I think adds a lot of stability with stiff roller springs, I wish Edelbrock offered it as an option. Last edited by Streetwize; 01/04/12 09:18 PM. WIZE World's Quickest Diahatsu Rocky (??) 414" Stroker Small block Mopar Powered. 10.84 @ 123...and gettin' quicker! https://www.youtube.com/watch?v=-mWzLma3YGI In Car: https://www.youtube.com/watch?v=PjXcf95e6v0

Re: Edelbrock Victor heads: post your combos, please!!! [Re: Streetwize] #1049290 01/05/12 12:09 AM 01/05/12 12:09 AM
Joined: Jan 2008 Posts: 449 Wisconsin sjs64polara mopar
sjs64polara mopar Joined: Jan 2008 Posts: 449 Wisconsin	I have a 505 with a little over 10.8:1 compression in my 64, MW Victor heads with 1.6 T&D rockers, and a Bullet 640 roller. The intake is a MW Rick Allison cross ram with (2) 835 Holley carbs done by Ken Jones. Don�t recall exact number but I believe it was around 720/730 ish hp and the same for the torque. The max hp was made at 5500 rpm on pump gas and I shift at 6k. The 64 is 3650lbs+ and runs low 10.50�s depending on traction. The 60 foots are poor and the RacePak shows a lot of wheel spin. I know it has more in it but I haven�t figured it out yet. Just make sure you have hood clearance�� I needed to use the 5�max wedge scoop because of the raised ports. 7002238-Time_Mach_2011_sun_711_copy.jpg (203 downloads)

Re: Edelbrock Victor heads: post your combos, please!!! [Re: tboomer] #1049291 01/05/12 12:56 AM 01/05/12 12:56 AM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Quote: Ron...Your car works very well! Dwayne did good on those heads! And heyoldguy...That there is pretty stout!! Oh by all means Ted you are right as the EZ heads are very good heads and for a guy like me who wants to keep it simple and have a decent running street/strip car you cant beat them. I just have heard that you can get more out of the heads with the raised exh ports. But I did not want the hassle of the header fitting and offset rockers. I went with the EZ heads as I felt if I do want to step it up more dowm the road that the EZ's have more potential the the Eddy RPM's which I was going to use. I would not hesitate to use the EZ's again and I am glad I did as it easily met my goal of running 10's on pump thru the full exh and driving to the track. Ron Oh and thanks for the kind words Ted.

Re: Edelbrock Victor heads: post your combos, please!!! [Re: 383man] #1049292 01/05/12 01:37 AM 01/05/12 01:37 AM
Joined: Jan 2003 Posts: 4,152 SO. CAL. 7 70blackfish master
70blackfish master 7 Joined: Jan 2003 Posts: 4,152 SO. CAL.	I run the victors and Dwayne ported them. makes about 725hp dwayne also spec the roller cam too. street/strip car

Re: Edelbrock Victor heads: post your combos, please!!! [Re: viperblue72] #1049293 01/05/12 01:37 AM 01/05/12 01:37 AM
Joined: Jan 2003 Posts: 5,484 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,484 SoCal	Quote: Seems like brian at imm engines (ou812)has an article coming out about them? Or maybe its super stealths I can't remember. Yeah, but we're starting with a 400, with budget in mind. The second article will be a stroker BB and ported MW Victors. Once you get past the pushrod clearancing they are a great cylinder head. If the guys at Koleno play along there will be a 3rd article based on their lowdeck block, and MAX effort Victor heads using either a vac pump or maybe dry sump. We want to see the very best they have to offer in a single 4 barrel build. Brian Brian Hafliger

Re: Edelbrock Victor heads: post your combos, please!!! [Re: Brian Hafliger] #1049294 01/05/12 01:39 AM 01/05/12 01:39 AM
Joined: Jan 2003 Posts: 4,152 SO. CAL. 7 70blackfish master
70blackfish master 7 Joined: Jan 2003 Posts: 4,152 SO. CAL.	Quote: Quote: Seems like brian at imm engines (ou812)has an article coming out about them? Or maybe its super stealths I can't remember. Yeah, but we're starting with a 400, with budget in mind. The second article will be a stroker BB and ported MW Victors. Once you get past the pushrod clearancing they are a great cylinder head. If the guys at Koleno play along there will be a 3rd article based on their lowdeck block, and MAX effort Victor heads using either a vac pump or maybe dry sump. We want to see the very best they have to offer in a single 4 barrel build. Brian were can I see this story?

Re: Edelbrock Victor heads: post your combos, please!!! [Re: viperblue72] #1049295 01/05/12 03:09 AM 01/05/12 03:09 AM
Joined: Dec 2005 Posts: 267 usa H hot67cuda enthusiast
hot67cuda enthusiast H Joined: Dec 2005 Posts: 267 usa	I only went to track once last summer with my victors car went 10.43 4 passes i was a little diapointed.I did no tunnig at all.I think the eng would be a lot happier with a bigger cam.I have a small roller in it now.265at .050 630 lift other that my 3500lb ride will see the 9,I do a lot of street driving I,m a carpenter in the sommer i park the truck and me and my helper will take the cudatruck to the job site with saws tool belt and all.yes we are carfull not to hurt my car lol.

Page 2 of 4

1

2

3

4

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1