Re: build me a bad a$$ small block
[Re: Mr.Yuck]
#1035936
07/19/11 09:02 PM
07/19/11 09:02 PM
|
Joined: Jan 2003
Posts: 5,486 SoCal
Brian Hafliger
master
|
master
Joined: Jan 2003
Posts: 5,486
SoCal
|
Quote:
Quote:
How about a 450cid, pump gas, Indy heads done by me, 1250 dominator, pump gas and around 700-720HP for about 15,500.00?
It won't be a street cam but it will make the power. 48° block, Charlies pan, etc....
Basicly our 800Hp build on pump gas and different cam. Brian
that's a TON of money. WHy not just use a low compression 360 and a blower and be done for half? less cam, less stall and less gear required and you can DRIVE IT
I agree NA is not the best way to get that much power. But that wasn't the question. And that included Carb to pan, headers and belt drive.
It might be less, but I never quote low...makes for upset customers. I'm involved with a customer of mine doing a Twin Turbo deal, RHS heads, hyd. roller cam that should make 700+ on pump gas with around 8-9psi and then we'll turn up the wick to about 14psi and see what happens.
He'll have about 12K in it including the Mega Squirt EFI! Brian
Brian Hafliger
|
|
|
Re: build me a bad a$$ small block
[Re: Brian Hafliger]
#1035937
07/19/11 10:06 PM
07/19/11 10:06 PM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
Quote:
Quote:
How about a 450cid, pump gas, Indy heads done by me, 1250 dominator, pump gas and around 700-720HP for about 15,500.00?
It won't be a street cam but it will make the power. 48° block, Charlies pan, etc....
Basicly our 800Hp build on pump gas and different cam. Brian
that's a TON of money. WHy not just use a low compression 360 and a blower and be done for half? less cam, less stall and less gear required and you can DRIVE IT
I agree NA is not the best way to get that much power. But that wasn't the question. And that included Carb to pan, headers and belt drive.
It might be less, but I never quote low...makes for upset customers. I'm involved with a customer of mine doing a Twin Turbo deal, RHS heads, hyd. roller cam that should make 700+ on pump gas with around 8-9psi and then we'll turn up the wick to about 14psi and see what happens.
He'll have about 12K in it including the Mega Squirt EFI! Brian
boost is the best way to go. 700 at 8 is good. w/ 12 lbs of boost you are really gonna push the numbers. You can get 700 all day w/ a BB e-heads and a 671. nothing fancy.
|
|
|
Re: build me a bad a$$ small block
[Re: Mr.Yuck]
#1035938
07/19/11 11:58 PM
07/19/11 11:58 PM
|
Joined: Jan 2003
Posts: 5,486 SoCal
Brian Hafliger
master
|
master
Joined: Jan 2003
Posts: 5,486
SoCal
|
6-71 blower isn't as pump gas friendly as the newer stuff. I don't disagree, but if you beef up the bottom end for the power, your gonna still have alot of money tied up in the build.
Brian Hafliger
|
|
|
|
|