Compsyn: I looked and I was using mopar performance hydraulic rocker arms and springs...

My heads are a set of heads that were machined and assembled by Herb McCandliss, they have mild port work 2.02-1.60, MP hyd rocker arms and springs with stainless steel valves...

And by the way I have failed to mention, there were not many hrs at all on this motor, it never made it to the street before the bearings spun on the 1st trip out and about, not sure exactly why, but already had my crank turned and bearings properly installed, so just trying to get this thing back together...Thanks!