Edelbrock 600 CFM on a 360 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Edelbrock 600 CFM on a 360

Print Thread

Re: Edelbrock 600 CFM on a 360 [Re: scrag] #980044 04/25/11 10:46 AM 04/25/11 10:46 AM
Joined: May 2003 Posts: 15,487 Florida S scratchnfotraction I Live Here
scratchnfotraction I Live Here S Joined: May 2003 Posts: 15,487 Florida	vac gauge and timeing light will help dial it in on the idle mixture screws. set curb idle and get the most vac you can adjusting the IAS and timeing

Entire Thread
Subject	Posted By	Posted
Edelbrock 600 CFM on a 360	scrag	04/25/11 09:04 AM
Re: Edelbrock 600 CFM on a 360	Kern Dog	04/25/11 09:22 AM
Re: Edelbrock 600 CFM on a 360	Dean_Kuzluzski	04/25/11 10:04 AM
Re: Edelbrock 600 CFM on a 360	scrag	04/25/11 10:47 AM
Re: Edelbrock 600 CFM on a 360	superbyrd	04/25/11 11:03 AM
Re: Edelbrock 600 CFM on a 360	Challenger 1	04/25/11 03:00 PM
Re: Edelbrock 600 CFM on a 360	Dean_Kuzluzski	04/25/11 09:02 PM
Re: Edelbrock 600 CFM on a 360	Dragula	04/26/11 12:06 AM
Re: Edelbrock 600 CFM on a 360	scratchnfotraction	04/26/11 01:41 AM
Re: Edelbrock 600 CFM on a 360	Paul_Fancsali	04/26/11 04:57 PM
Re: Edelbrock 600 CFM on a 360	scratchnfotraction	04/26/11 09:20 PM
Re: Edelbrock 600 CFM on a 360	Challenger 1	04/25/11 03:03 PM
Re: Edelbrock 600 CFM on a 360	patrick	04/25/11 03:37 PM
Re: Edelbrock 600 CFM on a 360	scratchnfotraction	04/25/11 08:01 PM
Re: Edelbrock 600 CFM on a 360	RapidRobert	04/25/11 01:26 PM
Re: Edelbrock 600 CFM on a 360	patrick	04/25/11 02:25 PM
Re: Edelbrock 600 CFM on a 360	scratchnfotraction	04/25/11 02:46 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1