BPE 4.250" Crank/OEM Block

Print Thread

Re: BPE 4.250" Crank/OEM Block [Re: BPE] #979354 04/24/11 10:33 AM 04/24/11 10:33 AM
Joined: Oct 2008 Posts: 458 Michigan BPE OP mopar
BPE OP mopar Joined: Oct 2008 Posts: 458 Michigan	Clearance to the oil pump and Milodon pick-up was checked with both rods in standard and HV Melling 72 oil pumps. Over .100" in all instances. 6600266-BPE4.250OEMBlock017.jpg (286 downloads)

Entire Thread
Subject	Posted By	Posted
BPE 4.250" Crank/OEM Block	BPE	04/24/11 02:25 PM
Re: BPE 4.250" Crank/OEM Block	BPE	04/24/11 02:28 PM
Re: BPE 4.250" Crank/OEM Block	BPE	04/24/11 02:29 PM
Re: BPE 4.250" Crank/OEM Block	BPE	04/24/11 02:33 PM
Re: BPE 4.250" Crank/OEM Block	BPE	04/24/11 02:36 PM
Re: BPE 4.250" Crank/OEM Block	DavidDean	04/24/11 03:07 PM
Re: BPE 4.250" Crank/OEM Block	Quicktree	04/24/11 03:08 PM
Re: BPE 4.250" Crank/OEM Block	Streetwize	04/24/11 03:27 PM
Re: BPE 4.250" Crank/OEM Block	S/ST 3040	04/24/11 04:28 PM
Re: BPE 4.250" Crank/OEM Block	Dunnuck Racing	04/24/11 04:46 PM
Re: BPE 4.250" Crank/OEM Block	Quicktree	04/24/11 04:56 PM
Re: BPE 4.250" Crank/OEM Block	Dunnuck Racing	04/24/11 05:10 PM
Re: BPE 4.250" Crank/OEM Block	Quicktree	04/24/11 05:26 PM
Re: BPE 4.250" Crank/OEM Block	Leon441	04/24/11 05:48 PM
Re: BPE 4.250" Crank/OEM Block	S/ST 3040	04/24/11 05:33 PM
Re: BPE 4.250" Crank/OEM Block	1Fast340	04/24/11 07:10 PM
Re: BPE 4.250" Crank/OEM Block	all spooled up	04/24/11 08:13 PM
Re: BPE 4.250" Crank/OEM Block	BPE	04/25/11 12:22 AM
Re: BPE 4.250" Crank/OEM Block	all spooled up	04/25/11 12:34 AM
Re: BPE 4.250" Crank/OEM Block	gremlinsteve	04/25/11 12:58 AM
Re: BPE 4.250" Crank/OEM Block	DJVCuda	04/25/11 01:19 AM
Re: BPE 4.250" Crank/OEM Block	Hitman340	04/26/11 02:49 AM
Re: BPE 4.250" Crank/OEM Block	DJVCuda	04/26/11 03:00 AM
Re: BPE 4.250" Crank/OEM Block	cheapstreetdustr	04/26/11 03:16 AM
Re: BPE 4.250" Crank/OEM Block	1Fast340	04/25/11 01:12 AM
Re: BPE 4.250" Crank/OEM Block	Five9Dak	04/26/11 04:03 AM
Re: BPE 4.250" Crank/OEM Block	MattW	05/29/11 07:36 PM
Re: BPE 4.250" Crank/OEM Block	HotRodDave	05/29/11 10:50 PM
Re: BPE 4.250" Crank/OEM Block	BPE	05/29/11 11:16 PM
Re: BPE 4.250" Crank/OEM Block	HEMIDARTS	04/24/11 03:55 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To