Without reading the entire post from what I see you may have a '68 early '69 V8 (non-Hemi) K-frame with the 4-holes (2-each side front) for the '68/'69 swaybar and NO swaybar end/link mounts on the Lower Control Arm (LCA). That is not an E-body K-frame. You need the LCA's with the swaybar mounts and it should work for any V8 Mopar engine of that era.


MikeR


This is the later '69 K-frame that started to change over to the '70 swaybar routing through the K-frame and still has the 4-holes at the front for the '68/'69 swaybar mounting like I think I see in you K-frame photo.