Edelbrock fuel injection

Print Thread

Re: Edelbrock fuel injection [Re: GetAwayDriver] #953478 03/19/11 05:19 PM 03/19/11 05:19 PM
Joined: Jan 2003 Posts: 3,078 Edmonton, Alberta, Canada Dartman75 master
Dartman75 master Joined: Jan 2003 Posts: 3,078 Edmonton, Alberta, Canada	Quote: Yeah, I'd like to know more about it too... Edlebrock quality so far above the Holley systems no doubt! What's a ball-park cost? Is that intake too tall to clear most standard hoods? I don't think it will be a problem to clear hoods. When you have no carb, no air cleaner up top etc. A tunnel ram style intake can work quite well. The front where the throttle body goes needs to angle down which starts to interfer with water plumbing etc, but on the whole not problems. This is my Small block 408 under the hood of my 75 dar with around 1/2" clearance on the closest partright at the throttle body. The only close-up pic I have already on the web: http://www.telusplanet.net/public/zbhansen/temp/HydroboostFromSide.JPG Mine is a Weiand SB tunnel ram base with a custom made plenum.

Hop To