Removing Torsion Bars - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Removing Torsion Bars

Print Thread

Re: Removing Torsion Bars [Re: hemigod426] #927956 02/13/11 08:57 PM 02/13/11 08:57 PM
Joined: Sep 2004 Posts: 833 Marietta, GA Joatha OP super stock
Joatha OP super stock Joined: Sep 2004 Posts: 833 Marietta, GA	Quote: Quote: You need one of these. when there rust welded in ive sheard the bolts on that tool and really messed it up I had borrowed one previously. All that tool did was slide up the bar. This thing is too tight for the standard tool. 1966 Barracuda 1968 Barracuda convertible 1930 Ford Model A (soon to be hemi equipped) 2006 Dodge 3500 4X4 CTD Quad Cab

Entire Thread
Subject	Posted By	Posted
Removing Torsion Bars	Joatha	02/13/11 08:21 PM
Re: Removing Torsion Bars	therocks	02/13/11 08:39 PM
Re: Removing Torsion Bars	hemigod426	02/13/11 08:59 PM
Re: Removing Torsion Bars	62maxwgn	02/13/11 09:53 PM
Re: Removing Torsion Bars	dOc …	02/13/11 10:01 PM
Re: Removing Torsion Bars	craigsmytcudas	02/13/11 11:32 PM
Re: Removing Torsion Bars	Joatha	02/14/11 12:59 AM
Re: Removing Torsion Bars	Sixpak	02/14/11 01:04 AM
Re: Removing Torsion Bars	Joatha	02/14/11 02:07 AM
Re: Removing Torsion Bars	hemigod426	02/13/11 11:42 PM
Re: Removing Torsion Bars	Joatha	02/14/11 12:57 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1